Contents 1. INSTRUCTIONS FOR USE ................................................................................................................. 30 2. RECYCLING INSTRUCTIONS - OUR ENVIRONMENT POLICY ....................................................... 31 3. SAFETY INSTRUCTIONS ................................................................................................................... 32 4. BEFORE FIRST USE ..........................................................................................
Precautions for use 1. INSTRUCTIONS FOR USE ELECTRICAL CONNECTION: CONSULT THE INSTALLATION INSTRUCTIONS FOR THE SAFETY STANDARDS FOR ELECTRICAL APPLIANCES AND FOR THE VENTILATION FUNCTIONS. IN YOUR OWN INTEREST, AND THAT OF SAFETY, THE LAW ESTABLISHES THAT ALL ELECTRICAL APPLIANCES BE INSTALLED AND SERVICED BY QUALIFIED PERSONNEL, IN ACCORDANCE WITH THE REGULATIONS IN FORCE. OUR APPROVED INSTALLERS GUARANTEE A SATISFACTORY JOB. ELECTRICAL APPLIANCES MUST ALWAYS BE UNINSTALLED BY COMPETENT PERSONS.
The environment – Recycling instructions 2. RECYCLING INSTRUCTIONS - OUR ENVIRONMENT POLICY Our household appliances are only packaged using non-polluting, environmentally friendly, recyclable materials. Please help by disposing of the packaging correctly. You can obtain the addresses of collection, recycling and disposal centres from your retailer or from the competent local organisations. Never leave all or part of the packaging lying around.
Safety instructions 3. SAFETY INSTRUCTIONS CONSULT THE INSTALLATION INSTRUCTIONS FOR THE SAFETY STANDARDS APPLICABLE TO ELECTRICAL APPLIANCES AND FOR THE VENTILATION FUNCTIONS. IN YOUR INTERESTS AND FOR YOUR SAFETY THE LAW REQUIRES THAT THE INSTALLATION AND SERVICING OF ALL ELECTRICAL APPLIANCES IS CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE. OUR APPROVED INSTALLERS GUARANTEE A SATISFACTORY JOB. ELECTRICAL APPLIANCES MUST ALWAYS BE UNINSTALLED BY COMPETENT PERSONS.
Safety instructions Please note: Beware of children in the vicinity as the warning lights indicating residual heat are out of their line of sight. The cooking zones remain hot for a certain period of time even after they have been turned off. Make sure that children never touch the hob. DUE TO THE RAPID REACTION IN THE CASE OF EXTREMELY HIGH COOKING TEMPERATURES (POWER FUNCTION LEVEL), DO NOT LEAVE THE INDUCTION HOB UNATTENDED WHEN SWITCHED ON. BE AWARE OF HOW RAPIDLY THE COOKING ZONES HEAT UP.
Safety instructions ENSURE THAT THE SENSOR BUTTONS ARE ALWAYS KEPT CLEAN AS THE APPLIANCE MAY INTERPRET DIRTY MARKS AS AN INTENTIONAL FINGER CONTACT. DO NOT PLACE OBJECTS OF ANY KIND (SAUCEPANS, TOWELS, ETC.) ON THE SENSORS. IF FOOD OVERFLOWS ONTO THE SENSOR BUTTONS, YOU ARE ADVISED TO TURN OFF THE APPLIANCE. SAUCEPANS AND OTHER PANS MUST NOT COVER THE SENSOR BUTTONS AS OTHERWISE THE APPLIANCE WILL AUTOMATICALLY DEACTIVATE. ACTIVATE THE CHILD SAFETY FUNCTION WHEN YOU HAVE PETS WHICH COULD REACH THE HOB.
Instructions for the User 4. BEFORE FIRST USE Do not leave waste packaging unattended in the home environment. Separate the various waste materials and take them to the nearest differentiated waste collection centre. Remove all the REMOVABLE labels and any protective film from the appliance. To switch on the hob, follow the instructions provided under “Use of the hob". Before cooking for the first time the hob has to be cleaned.
Instructions for the User 6. DESCRIPTION OF THE APPLIANCE AND THE CONTROLS ON THE FRONT PANEL 6.1 The hob The hob is an induction hob. An induction coil located under the glass ceramic cooking surface creates an alternating electromagnetic field which enters the glass ceramic and induces a thermal current in the base of the saucepan.
Instructions for the User 6.3 Limitation on the duration of use The hob has an automatic device which limits the duration of use. The duration of operation of each cooking zone depends on the power level selected (see table). The assumption is that no changes are made to the settings of the cooking zone while it is in operation. When the device for limiting the duration of use is activated, the cooking zone turns off, a short alert is sounded and will show on the display.
Instructions for the User How to tell whether you are using the right saucepan Carry out the magnet test described below or check whether the container bears the stamp indicating that it is suitable for cooking with an induction current. Magnet test: Move the magnet towards the base of your cooking container. If the magnet is attracted, you can use the container on the induction hob.
Instructions for the User 6.9 Residual heat indicator The hob is equipped with a residual heat indicator in the form of the symbol. When is displayed after the heat has been switched off, it indicates that the residual heat can be used to keep food hot or melt certain foods. The cooking zone may still be hot even after the symbol is no longer displayed. Danger of burns! The glass ceramic surface does not heat up directly but is heated only indirectly by the bases of the saucepans. 6.
Instructions for the User 7. USING THE SENSORS The glass ceramic hob is controlled by means of the Touch Control sensor buttons. Operating the sensor buttons: lightly touch a symbol on the glass ceramic surface. The buzzer will sound to confirm every effective touch. For simplicity, from now on we will refer to the Touch Control sensor buttons simply as the «button». On/off button Use this to turn the hob on and off. In effect, this button is the main switch.
Instructions for the User 8. USING THE HOB 8.1 Warnings and general advice To operate a hob equipped with touch controls, lightly press the symbols printed on the surface of the hob. Every pressure on a symbol is confirmed by a control beep. On first connection to the electrical mains, an operating check will be carried out automatically and all the indicator lights will come on for a few seconds. 8.
Instructions for the User 8.3 Switching on the hob and the cooking zone To activate the control described here, after pressing one (selection) button, you need to press another one afterwards. The second button needs to be pressed within 10 seconds, as otherwise the desired selection will be deactivated. 1 Press the on/off button until the power level indicators show «0». The function lights will flash. The control is then ready for use. 2 Then press a button to select the cooking zone (e.g.
Instructions for the User Activating the child lock 1. Press the on/off button to turn on the hob. 2. Then press the button and the button simultaneously. 3. Then press the button only to activate the child lock. The power level indicators display that the child lock is activated; the controls are locked and the hob deactivates. to show Deactivating the child lock 4. Press the ON/OFF BUTTON. 5. Then press the button and the button simultaneously. 6. Then press the button only to deactivate the child lock.
Instructions for the User 8.9 Timer clock Press the timer selector until the timer clock light starts to flash. Set the time in minutes by pressing the button or the button. When the set time elapses, the buzzer sounds briefly and this can be deactivated by pressing any button (except the on/off button). Please note: The timer clock continues to operate after the hob has turned off. To modify the set time, turn on the hob by pressing the on/off button . 8.
Instructions for the User Instructions • During quick start, you can increase the power of the normal cooking stage by pressing the button. Press the button to deactivate the quick start cooking function. • If no power level less than 9 is selected for the normal cooking stage after the quick start function has been activated, the function automatically deactivates after 10 seconds and the zone remains at power level 9.
Instructions for the User 8.13 Power management For technical reasons, the cooking zones are connected in twos within a module and have a maximum power capacity. If this power capacity is exceeded when activating a high cooking level or the Power function, power management reduces the cooking level of the a ppropriate zone within the module. The indicator for this cooking zone flashes initially, then only the maximum possible power level will be displayed. 8.
Instructions for the User 9. CLEANING AND MAINTENANCE Before performing any operations, switch off the power supply to the appliance. 9.1 Cleaning the glass ceramic hob The glass ceramic hob should be regularly cleaned, preferably after every use, once the residual heat warning lights have gone off. Smudges from aluminium-based pans can be easily cleaned off with a cloth dampened in vinegar.
Instructions for the User 10. TROUBLE-SHOOTING PROBLEM The hob does not work. - - The results of cooking are unsatisfactory. - The hob smokes. The cooking zones do not come on during timed cooking. The symbol will start to flash and the buzzer will sound briefly. The fuses or the magnetothermal switch of the appliance are repeatedly triggered. POSSIBLE CAUSES The hob is not wired in or it is not switched on at the wall. There is a power failure.
Instructions for the User The saucepans in use are making a noise. The cooling fan continues to function even after the hob has been turned off. Sounds can be heard as if something was creaking or switching on. - - - The noise is due to technical reasons. There is no danger to the hob or the saucepan. This is normal because the electronics need to cool down. This is for technical reasons and cannot be avoided. - There are cracks or fissures in the hob.
Instructions for the installer 11. INSTALLATION 11.1 Safety instructions for installing kitchen furniture • • • • • • • Veneers, adhesives or plastic coatings on adjacent furniture should be temperature-resistant (>75°C). If they are not sufficiently temperature-resistant, they may warp over time. When the appliance has been installed, it must be protected from accidental contact with the electric cables.
Instructions for the installer 11.4 Hob seal • • • • Before installing, check that the hob seal is attached properly. Ensure that no liquid gets between the frame of the hob and the work surface, or between the hob and the wall, as it could then fall onto appliances below. If the hob is installed into a work surface which is not flat, e.g. ones with ceramic or similar coverings (tiles, etc.), any seal on the hob must be removed and the cooking surface must be sealed using plastic sealant.
Instructions for the installer 11.6 Positioning the fastening clips • Insert the fastening clips in each of the positions indicated by the arrows. The clips ensure that the hob will be fixed and centred as accurately as possible. • To install the clips into the hob, all you have to do is insert them horizontally into the appropriate space by applying light pressure. • Then turn them upwards to fix them in place. 11.
Instructions for the installer 11.8 Technical information • • • • Hob model Electrical connections HOB RATING Maximum power See rating plate 220-240V~ 50/60Hz / 380-415V 2N~ 50/60Hz I See rating plate 11.9 The rating plate Make sure that the voltage and capacity of the power line conform to the data shown on the plate located under the casing. Do not remove this plate for any reason. 11.10 Electrical connection • • • The electrical connection of the hob must be installed by an authorised technician.
Instructions for the installer 1 - Operation at 380-415V2N˜: use a H05V2V2-F type four-core cable (4 x 2.5 mm2 cable); 2 - Operation at 220-240V˜: use a H05V2V2-F type three-core cable (3 x 4 mm2 cable); The end to be connected to the appliance must have an earth wire (yellow-green) at least 20 mm longer than the others. The manufacturer cannot be held liable for damage to persons or things caused by failure to observe the above instructions or by tampering with any part of the appliance. 11.
