Technical data

Instructions for the installer
30
For operation on 380-415 V 3N ∼ : use an - H05V2V2-F type five-core
cable (5 x 1,5 mm
2
).
For operation on 380-415 V 2N ∼ : use an - H05V2V2-F type four-core
cable (4 x 2,5 mm
2
).
For operation on 220-240 V 3 ∼ : use an - H05V2V2-F type four-core
cable (4 x 2,5 mm
2
).
For operation on 220-240 V ∼ : use an - H05V2V2-F type three-core
cable. (3 x 4 mm
2
: hob with 5 cooking zones)
The cable end to be connected to the appliance must be provided with
an earth wire (yellow-green) at least 20 mm longer.
READ THE CONNECTION LAYOUT PLATE UNDERNEATH THE APPLIANCE WITH CARE.
If the appliance you have purchased is not fitted with a mains power lead a power lead
resistant to a temperature of at least 90°C must be used.
Otherwise, the electrical safety of the appliance may be put at risk.
The manufacturer declines all responsibility for damage to persons or things caused by non-
observance of the above prescriptions or by interference with any part of the appliance.
Warning: close the cable clamp after making the
electrical connection. Close the terminal board cover by
twisting it down.