Use and Care

Use
16
After setting the amount of cooking time,
press PT1 once.
The symbol and the current time will
appear on the display.
Turning PT1 to the right increases the time,
allowing the desired cooking start time to
be set.
A few seconds after the desired time is set,
the and symbols will stop flashing,
and the oven will start to wait for the start
time setting. When the cooking time is over,
the word will appear on DSP1,
cooking will stop and a buzzer will sound.
Press PT1 once to silence it.
Changing the cooking settings
Once programmed cooking has started,
the cooking time can be changed.
When the and symbols are steady
on and cooking is in progress, or the oven is
in stand-by mode waiting for cooking to
start, press PT1 once. The symbol starts
flashing and PT1 can be turned to change
the cooking time.
Press PT1 again; the symbol turns off,
the symbol will start to flash, and the
cooking start time will be displayed on
DSP1. The cooking start time can be
advanced or turned back by turning PT1.
A few seconds after the last change, the
and symbols will appear (in steady on
mode) on DSP1 and programmed cooking
will restart with the new settings.
If you wish to lengthen the cooking
time, press PT1 again. The oven
will restart normal operation with
the temperature settings selected
previously.
PT2 must be pressed to turn the
oven off completely.
Once cooking has been
programmed but before it starts,
the function symbol will remain on,
as will the symbols and .