Instruction manual

Use
76
Programmed cooking
1. After selecting a cooking function and
temperature, press the selection
knob .
The display shows the digits
and the Cooking indicator light and
Clock indicator light flash.
2. Within 3 seconds turn the selection knob
to set the cooking time (from
1 minute to 13 hours) (e.g. "25 minutes").
3. Press the Selection knob .
The display shows the digits
and the Cooking end indicator light
and Clock indicator light flash.
4. Turn the selection knob within 3
seconds to set the end of cooking time
(e.g. "13:15").
5. Wait 3 seconds.
The cooking end indicator light
remains on and the appliance waits for the
set start time.
Programmed cooking is the
function which allows a time-
controlled cooking operation to
be stopped automatically at an
established time depending on the
time set by the user, after which the
appliance will switch off
automatically.
For safety reasons, it is not possible
to set the end of cooking time by
itself without setting the cooking
duration.
For safety reasons, Programmed
Cooking cannot be set for
Microwave and Combined
functions.
The minutes required for pre-
heating are already included in the
end-of-cooking time.