User manual

Use
35
EN
Manual water drainage
1. Place the jug (or container) supplied on
the open door.
2. Extract the tube from its seat and place
the end in the jug (or the container).
3. Press the function knob to activate the
residual water drainage into the jug (or
container).
When complete, the display will indicate
that the residual water removal process is
complete.
4. Shake the tube in order to remove any
remaining water.
5. Return the tube to its original position,
remove the jug (or container) and close
the door.
6. Press the function knob to exit the function
menu.
This function allows you to empty
the reservoir manually.
To stop the active function and
switch of the appliance, press the
function knob for a few seconds.