User manual

Use
36
Manual water fill
1. Fill the jug (or container) supplied with a
sufficient amount of water for the cooking
that you intend to do.
2. Open the oven door.
3. Place the jug (or container) on the open
door.
4. Extract the tube from its seat and immerse
its end in the jug (or container) until it
reaches all the way to the bottom.
5. Press the function knob to start drawing
water into the appliance’s reservoir.
This function allows you to
manually fill the reservoir, if you
want to perform multiple steam
cooking cycles.
Please note: when filled with
water, the jug (or container) must
have a gross weight of less than
5 kg.
The appliance will take in water
until the reservoir is completely full.
To stop the active function and
switch of the appliance, press the
function knob for a few seconds.