User manual

Use
39
EN
Showroom mode (for exhibitors only)
This mode allows the appliance to
deactivate all heating elements, while
keeping the control panel active.
To use the appliance normally, set this
mode to OFF.
Eco-light mode
For greater energy savings, the light is
automatically deactivated one minute from
the start of cooking.
To stop the appliance from automatically
deactivating the light after one minute, set
this mode to OFF.
Water hardness setting mode
This mode allows you to set the water
hardness value in order to optimise the
descaling process.
It is possible to modify the water
hardness setting from the minimum
value (one bar)...
... Up to the maximum value (five bars).
If the mode is active, the indicator
light lights up on the display.
The manual off/on control is
always available with both settings
by turning the temperature knob to
the right.
The appliance is factory set for
water of medium hardness.
Request information on the
hardness of your water from your
local water board.
If your mains water supply is too
hard, we recommend
using a water softener.