Operation Manual

Use
124
The residual water is discharged into the
evaporation tray: as well as facilitating
removal, this contributes to cooling down
the oven more quickly.
If the remaining quantity of water is over
500 ml, the water will be discharged into
the evaporation tray in two different steps to
facilitate drying. The display indicates “STEP 1”,
when this finishes, draining will stop. You
have to press the control knob again to
complete the draining with “STEP 2”.
When finished, “reservoir emptying ended”
appears on the display.
6. Press “ok” to confirm.
7. Squeeze out the water from the sponge
into a separate container.
3.7 Preset recipes
This mode allows you to select a pre-set
food cooking program. The appliance will
automatically calculate the optimum
cooking parameters based on the weight
entered.
Select the preset recipes icon on the
“home screen”.
Take care: the water may be very
hot.
In this function, cooking itself is
preceded by a preheating stage,
which allows the oven to heat to
the cooking temperature more
quickly.
When the preheating stage is over
a buzzer will sound to indicate that
the food can be placed inside the
oven. Introduce the food and then
press the function knob to proceed
with cooking.