Operation Manual

Cleaning and maintenance
150
End of the Vapor Clean cycle
1. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
2. Use a non-scratch sponge with brass
filaments on hard to remove deposits.
3. In case of grease residues use specific
oven cleaning products.
4. Remove the water left inside the oven.
5. For improved hygiene and to avoid food
being affected by any unpleasant
odours, we recommend that the oven is
dried using a fan assisted function at
160°C for approximately 10 minutes.
4.7 Descaling
The following indication will periodically
appear on the appliance's display,
notifying you that it is necessary to perform
descaling of the evaporation tray on the
base of the oven:
1. Press yes to accept the descaling
request.
2. Open the door completely.
We recommend wearing rubber
gloves for these operations.
We recommend removing the
door in order to make the manual
cleaning of the parts that are
difficult to reach easier.
The presence of scale due to lack
of descaling can compromise
correct operation of the appliance
in the long term.