Operation Manual

Cleaning and maintenance
154
7. Press the symbol to start drawing the
solution into the appliance’s reservoir.
8. When the appliance has finished taking
in water, shake the tube to remove any
residual water.
9. Return the tube to its original position,
remove the container of solution and
close the door.
10. When the reservoir is full, the display
will show the remaining time in the
cleaning cycle.
When the cleaning process is complete, a
buzzer will sound and the display will show
the solution draining screen.
The appliance will automatically
draw sufficient solution to fill the
reservoir.
If water remains in the reservoir for
longer than 24 hours, a message
appears on the display requesting
you to drain the reservoir.
When the door is closed, an
automatic system will automatically
draw in any residual solution in the
tube to avoid drips.