DOLCE STIL NOVO Tips & tricks for a perfect alignment Consigli e suggerimenti per un perfetto allineamento
EN This installation manual is accompanied by a demonstration video that can be viewed at: www.youtube.
Positioning the products in 60 cm high recesses Positioning the products in 45 cm high recesses
INSTALLATION - Products in 60 cm high recesses If the DOMESTIC APPLIANCES are to be INSTALLED IN 60 CM HIGH RECESSES: 1. Make sure that the unit is squared and level the support bases. (Fig. 1) 2. Make sure that the individual shelves are perfectly horizontal. (Fig. 1) 3. If there is a 60 cm oven in the composition, this should be the first product to IMPORTANT: -- Insert all the drawers into remaining recesses, level them and align the lower trims with the lower trim of the 60 cm oven (Fig.4).
INSTALLATION - Products in 60 cm high recesses 5. Make sure that the drawers are flush with the door of the oven. If necessary, carry out the following adjustments: -- Use a 5 mm hex wrench to regulate the drawer fastening mechanism. Turn it clockwise to move the drawer outwards, turn it anticlockwise to move the drawer inwards (Fig. 5) -- If the left or right hand sides of the front of the drawer are not perfectly flush, place a shim behind the drawer support bracket to compensate for any differences. 6.
INSTALLATION - Products in 60 cm high recesses • Coffee machine: If the width of the recess is 560 mm: there is no need to place shims behind the plate of the guides. (Fig. 8) Pull out the runners and place the coffee machine on them. (Fig. 10) If the width of the recess is 562 mm place the 1 mm shims provided behind the plates of the guides. (Fig. 8) If the width of the recess is 564 mm place the 2 mm shims provided behind the plates of the guides. (Fig. 8) Fig.
INSTALLATION - Products in 60 cm high recesses • Wine cooler: Place the wine cooler on the drawer and check its horizontal alignment. If necessary, place shims* under the feet of the wine cooler. (Fig. 13) Fasten the wine cooler using the screws. (Fig. 14) Fig. 11 Fig. 13 Fig. 14 * shims not supplied Fig. 12 Fasten the brackets using all the necessary screws. 30 7. Adjust the hinges of the doors around the products in order to make the gaps uniform.
INSTALLATION - Products in 45 cm high recesses If the DOMESTIC APPLIANCES are to be INSTALLED IN 45 CM HIGH RECESSES: 1. Make sure that the unit is squared and level the support bases. (Fig. 1) 2. Make sure that the individual shelves are perfectly horizontal. Otherwise, any misalignment must be corrected after the product has been inserted. (Fig. 1) 4. Insert the second product next to 45 cm oven that has already been installed: • 45 cm Oven: Align the upper trims of the ovens.
INSTALLATION - Products in 45 cm high recesses • Coffee machine: If the width of the recess is 560 mm: there is no need to place shims behind the plate of the guides. (Fig. 5) Pull out the runners and place the coffee machine on them. (Fig. 6) If the width of the recess is 562 mm place the 1 mm shims provided behind the plates of the guides. (Fig. 4) If the width of the recess is 564 mm place the 2 mm shims provided behind the plates of the guides. (Fig.4) Fig.
INSTALLATION - Products in 45 cm high recesses • Wine cooler: Insert the product in the unit and centre it. Make sure that the upper trims of adjacent products are aligned. If necessary, place shims under the feet of the wine cooler (Fig. 9) to compensate for any misalignment. Lastly, secure the product using the screws. (Fig. 10) Fig. 7 * shims not supplied Fig. 9 Fig. 10 * shims not supplied Fig. 8 Fasten the brackets using all the necessary screws. 36 5.
smeg.
