Contents 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 General safety instructions Instructions for using microwaves Manufacturer liability Appliance purpose Identification plate Disposal This user manual How to read the user manual 2 Description 2.1 2.2 2.3 2.4 2.5 General Description Control panel Other parts Microwaves Available accessories 3 Use 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.
Instructions 1 Instructions IMPORTANT SAFETY INSTRUCTIONS PLEASE READ CAREFULLY AND RETAIN FOR FUTURE USE. 1.1 General safety instructions Risk of personal injury • WARNING: If the door or the door seal is damaged, the oven must not be used until it has been repaired by a competent person. • WARNING: It is hazardous for anyone other than a competent person to carry out any service or repair operation which involves the removal of a cover which offers protection against exposure to microwave energy.
Instructions 1.2 Instructions for using microwaves • Check the appliance visually during the cooking of foods in plastic or paper containers. EN • Do not try to repair the appliance yourself or without the intervention of a qualified technician. • If the power supply cable is damaged, contact technical support immediately and they will replace it. Improper use Danger of explosion Risk of damaging the appliance • Do not use abrasive or corrosive detergents on glass parts (e.g.
Instructions (e.g. drying clothes, warming slippers, sponges, wet cloths or the like, dehydrating foods) because they can lead to the risk of injury or fire. • Clean the appliance constantly and remove any food residue. • Do not use the microwave to dry food. • Do not use the microwave to heat oils or fry. • Do not use the appliance to heat foods or beverages containing alcohol. • Baby food should not be heated in sealed containers. Remove the cover or the teat (in the case of baby bottles).
1.3 Manufacturer liability 1.6 Disposal The manufacturer declines all liability for damage to persons or property caused by: • Use of the appliance other than the one envisaged; • Non-observance of the user manual provisions; • Tampering with any part of the appliance; • Use of non-original spare parts. This appliance must be disposed of separately from other waste (Directives 2002/95/EC, 2002/ 96/EC, 2003/108/EC).
Instructions 1.7 This user manual 1.8 How to read the user manual This user manual is an integral part of the appliance and must therefore be kept in its entirety and within the user’s reach for the whole working life of the appliance. • Read this user manual carefully before using the appliance. This user manual uses the following reading conventions: Instructions General information on this user manual, on safety and final disposal. Description Description of the appliance and its accessories.
Description 2 Description EN 2.1 General Description 1 Control panel 2 LH light 3 Seal 4 Door 5 Oven fan 6 Rack/tray support frames Frame shelf 2.2 Control panel 1 Display The touchscreen display allows you to interact with the device. Press the icons to access the various available functions. The display will show all operational parameters, such as: selected function, preset cooking program or time/temperature settings.
Description 2.3 Other parts Interior lighting Shelves The appliance’s interior lighting comes on: • When the door is opened. • When any function is selected, apart from the Sabbath and Vapor Clean The appliance features shelves to position trays and racks at different heights. The insertion heights are indicated from the bottom upwards (see 2.1 General Description). Cooling fan functions. • Press the symbol to manually activate the oven light or the symbol to deactivate it during use.
Description 2.5 Available accessories Tray rack EN Some models are not provided with all accessories. Rack To be placed over the top of the oven tray; for cooking foods which may drip. Boiling rod Useful for supporting containers with food during cooking. Glass dish To be placed in containers when heating liquids, necessary to avoid delayed boiling with resulting superheating.
Description 3 Use 3.1 Instructions High temperature inside the oven during use Danger of burns • Keep the oven door closed during cooking. • Protect your hands wearing heat resistant gloves when moving food inside the oven. • Do not touch the heating elements inside the oven. • Do not pour water directly onto very hot trays. • Do not allow children to approach the oven when it is in operation.
Use MATERIALS TO USE Glass* • Baking ware • Glasses • Glass jars Always remove the covers. Porcelain Ceramic Plastic* Only where suitable for microwave use. Where film is used it must not come into contact with the food. • Containers • Plastic wrap *only if heat-resistant NOT TO BE USED Metal • Aluminium foil • Aluminium trays These can lead to arcing or sparks. • Plates • Metal utensils • Freezer bags tie wraps Wood Crystal glasses Paper Risk of fire.
Use 3.2 First use 1. Remove any protective film from the outside or inside of the appliance, including accessories. 2. Remove any labels (apart from the technical data plate) from the accessories and from the oven cavity. 3. Remove and wash all the appliance accessories (see 4 Cleaning and maintenance). 4. Heat the empty oven at maximum temperature (using the traditional functions) so as to remove any manufacturing residues. For the first reheating use a traditional function and not a microwave function.
Use 3.4 Using the oven When using the microwave to heat or reheat liquids, the boiling process may be delayed while the liquids nevertheless exceed 100 degrees. To avoid this dangerous phenomenon, it is necessary to insert the supplied boiling rod (or a heatresistant plastic spoon) in the container while heating. First use EN Boiling rod On the first use, or after a power failure, will be flashing on the appliance’s display.
Use Home screen Press the time on the display. It is now possible to select the various available functions on the home screen of the appliance. Microwave functions For microwave cooking, the food must be placed in a container resting on the rack inserted in the first runner. IT IS NOT RECOMMENDED TO COOK FOOD IN A CONTAINER RESTING ON THE BOTTOM OF THE OVEN.
Use 1. Place the dish into the oven cavity. icon to change the EN 2. Select the cooking functions on the “home screen”. 4. Press the symbol cooking time. 5. Enter the required duration (for example 5 minutes: first touch the minutes box, then the numbers 0 and 5). 3. Select the required function. 6. Press the symbol to confirm. When cooking using only the microwave function, the appliance does not perform preheating. The food can be placed immediately inside the appliance.
Use 7. Press the symbol to change the microwave power level (from 100W to 1000W). 10. Press the symbol microwave cooking. 8. Use the symbols and to set the required temperature (e.g. 900 W). 11. The chosen function, the selected power level, the current time and the time remaining until the end of the function will be shown on the display. 9. Press the symbol 84 to confirm.
Use symbol or . QUICK START microwave function The QUICK START function allows the microwave to be started quickly. This is useful for heating small quantities of liquid or food. 1. Press screen”. on the “home 2. Press the symbol to confirm the QUICK START function. Press and hold the return symbol for a few seconds to immediately interrupt cooking at any time and return to the main menu.
Use Combination functions Combination cooking is a mix of traditional cooking and microwave operation. 1. Select the cooking functions on the “home screen”. icon Combination functions list Improper use Risk of damage to the appliance • Do not use the combination functions to heat or boil liquids. Microwave + Grill The use of the grill results in perfect browning of the food’s surface. Using the microwave on the other hand leads to rapid internal cooking of the food.
Use At this point it is possible to modify: • The cooking duration (press the symbol ). 4. After placing the food in the oven, press the control knob to start cooking. 3. When you have finished making the required modifications, press the symbol to activate the set combination cooking function. The appliance will begin preheating. The display will show the chosen function, the pre-set temperature, the current time and the progress bar of the temperature reached (preheating).
Use Traditional functions 1. Select the cooking functions on the “home screen”. icon 2. Press the symbol to access the traditional functions menu. 3. Select the required function. 88 4. The appliance will begin preheating. The display will show the chosen function, the pre-set temperature, the current time and the progress bar of the temperature reached (preheating). 5. When the preheating stage is over, a buzzer will sound to indicate that the food can be placed inside the oven.
Use Changing a function during cooking EN 1. Press the symbol corresponding to the function you wish to modify. 4. The display will show the new function chosen, the preset temperature, the current time and the progress in reaching the new temperature. 2. Press the symbol to access the traditional functions menu. Modifying the preset temperature 1. Press the displayed temperature to change it. 3. Press the symbol of the new function required. 2. Use the symbols and required temperature.
Use 3. Press the symbol to confirm. Traditional functions list Eco The combination of the fan and the circulaire heating element, in ECO mode, is particularly indicated for cooking on a single shelf, with reduced power consumption. Interrupting a function Press the return symbol for approximately 2 seconds to interrupt a cooking function. Select the required option. Press and hold the return symbol for a few seconds to immediately interrupt cooking at any time and return to the main menu.
Fan with grill The air produced by the fan softens the strong heatwave generated by the grill, perfectly grilling even very thick cuts of meat such as steaks, pork chops, etc. Fan + lower element The combination of the fan with just the lower heating element allows cooking to be completed more rapidly. This system is recommended for sterilising or for finishing off the cooking of foods which are already well-cooked on the surface, but not inside, which therefore need a little more heat.
Use 5. The countdown will start. Timer during function This function only activates the buzzer, without stopping cooking. 1. Press the symbol function. 2. Press on timer. during a cooking 6. Wait for the buzzer to indicate that the time has finished. The symbol flashes. Press the symbol or to deactivate the buzzer. Press the symbol again to select another timer. The duration of the timer can be from a minimum of 1 minute to a maximum of 4 hours. 3.
Use Timed cooking 4. Press the symbol Activation of timed cooking cancels any minute minder timer which may previously have been set. 1. Press the symbol function. 2. Press on duration. during a cooking The duration of the minute minder can be from a minimum of 1 minute to a maximum of 13 hours. 3. Enter the required duration (for example 25 minutes: first touch the minutes box, then the numbers 2 and 5). 5. Timed cooking begins.
Use Modifying the data set during timed cooking During operation, it is possible to modify timed cooking duration: 1. Press the symbol first touch the hours box, then the numbers 1 and 9; touch the minutes box, then the numbers 3 and 0). . 2. Press on duration. 4. Press the symbol 3. Enter the new duration required and press the symbol to confirm. 5. The appliance waits for the delay start time. to confirm.
Use Modifying the data set during programmed cooking After modifying the cooking duration, the end of cooking time must be re-set. During operation, it is possible to modify programmed cooking duration: 8. At the end of the cooking cycle, “function ended” appears on the display and a buzzer will sound that can be deactivated by pressing the symbol or 1. Press the symbol . 2. Enter the new duration required (for example 35 minutes) and press the symbol to confirm. . 3.
Use Traditional cooking tips General advice • Use a fan assisted function to achieve consistent cooking at several levels. • It is not possible to shorten cooking times by increasing the temperature (the food could be overcooked on the outside and undercooked on the inside). Advice for cooking meat • Cooking times vary according to the thickness and quality of the food and to consumer taste. • Use a meat thermometer when roasting meat, or simply press on the roast with a spoon.
3.5 Special functions The special functions menu contains some functions like the timer with the oven off, defrosting or cleaning functions. Select the special functions icon on the “home screen”. Reheat This function allows you to reheat previously cooked food kept cool or in the refrigerator. Sabbath This function allows food to be cooked in accordance with the provisions of the Jewish religion day of rest.
Use 5. Wait for the buzzer to indicate that the Timer The duration of the minute minder can be from a minimum of 1 minute to a maximum of 4 hours. 1. Select timer from the “special functions” menu. time has finished. The symbol flashes. Press the symbol or to deactivate the buzzer. Press the symbol again to select another timer. 6. If you leave the timer setting screen, the symbol will be displayed at the top left, indicating that a timer is active. 2.
Use 1. Place the food inside the appliance. 2. Select defrost by weight from the “special functions” menu. 3. Select the type of food to defrost. 4. Use the symbols and to enter the weight (in kilograms) of the food to defrost. 6. Select start to start defrosting, or select change to further modify the set parameters. EN Defrost by weight 7. Press the symbol to start the defrost by weight function. 8. The defrost by weight will start. 9.
Use Pre-set parameters: Type Weight (kg) Time Meat 0.5 01h 45m Fish 0.4 00h 40m Fruit 0.3 00h 45m Bread 0.3 00h 20m 5. Press the symbol again to start the defrost by time function. 6. The defrost by time will start. Defrost by time 1. Place the food inside the appliance. 2. Select defrost by time from the “special functions” menu. 7. While the function is in progress, it is possible to further modify the defrosting duration (see “Timed cooking”).
Use For best defrosting results it is recommended, when necessary, to turn the dish inside the oven cavity. 1. Put the dish in the oven placing it parallel to the door. 4. Close the appliance door and press the symbol to resume the function. 5. If necessary the appliance will again ask for rotation of the dish. The display will show the instruction “open door and rotate dish”. 6. For the second rotation the door will need to be opened and the dish turned by 180°. 2.
Use Proving For successful proving, a container of water should be placed in the bottom of the oven. 1. Position the dough to prove on the second level. 2. Select proving from the “special functions” menu. 6. While the function is in progress, it is possible to set a timer for a maximum of 4 hours (see “Microwave functions”), a proving duration (see “Timed cooking”) or delayed proving (see “Delay cooking”). Press the symbol the desired changes.
Use Reheat This function allows you to heat previously cooked food which has been kept cool or in the refrigerator. 1. Place the food to be heated inside the appliance. 2. Select reheat from the “special functions” menu. 3. Press the symbol reheating time. to modify the 4. Press the symbol to start reheating. This function results in the appliance operating in a particular way: • Cooking can proceed indefinitely, it is not possible to set any cooking duration. • No preheating will be performed.
Use 1. Select sabbath from the “special functions” menu. 3.6 Preset recipes This mode allows you to select a pre-set food cooking program. The appliance will automatically calculate the optimum cooking parameters based on the weight entered. Select the preset recipes icon on the “home screen”. 2. Press the symbol to start the Sabbath function, or press the preset temperature value to change it (from 60° to 100° C). 3. When finished, press and hold the return symbol 104 to return to the main menu.
Use 1. Press the symbols and to select the type of dish required from the “preset recipes” menu. Then press the name of the dish to confirm. 4. Press the symbol weight of the dish. to change the EN Starting a preset recipe 5. Use the symbols and to enter the weight (in kilograms) of the dish. 2. Select the sub-type of dish to cook and press the name of the sub-type of dish to confirm. 6. Press the symbol 3.
Use 9. If you choose the start option, cooking will start with the preset recipe’s predefined settings and the display will show all the parameters set. The time shown does not include the time to reach temperature. Some predefined cooking parameters can be changed at any time, even after cooking has started. 106 10. A buzzer will sound and a message will be displayed to indicate when to place the food in the oven and enable the start of cooking. 11. Press the symbol to start cooking.
End of a preset recipe Permanently modifying a preset recipe 1. At the end of the preset recipe, the appliance will notify the user with a buzzer and the symbol will flash. 1. Inside the selected preset recipe, select change from the menu of the selected dish. 2. To cook again with the previously set All parameters which can be changed will be highlighted in yellow on the main screen. parameters, press the symbol (press twice if the buzzer is active).
Use • Cooking function 3. Make the required changes. 4. Press the symbol to store the recipe. The appliance will ask to confirm the changes which have just been made. • Cooking duration If the modifications are not confirmed, the preset recipe will remain unchanged. • Oven shelf • Weight of dish 108 5. If the change is confirmed the display will show confirmation of this.
Use Predefined programs table Subcategory Roast beef Roast pork Cooking Weight (Kg) Function MW (W) Shelf Temp. (°C) Time (minutes) Rare 1 - 1 200 50 Medium 1 - 1 200 60 Well done 1 - 1 200 90 Fresh 1 300 1 190 60 Medium 1.2 300 1 190 55 Well done 1.2 300 1 190 60 Lamb Veal Fresh 1 300 1 190 70 Pork spare ribs Fresh 1 - 3 250 16 Pork chops Fresh 1 - 3 250 15 Pork sausages Fresh 1 - 3 250 12 Bacon Fresh 0.
Use FISH Subcategory Cooking Weight (Kg) Function MW (W) Shelf Temp. (°C) Time (minutes) Fish Fresh 0.5 300 1 160 30 Fish Frozen 0.5 300 1 160 40 Sea bass Fresh 0.5 300 1 160 20 Monkfish Fresh 0.5 300 1 160 35 Snapper Fresh 1 300 1 160 40 Turbot Fresh 0.5 300 1 160 30 MW (W) Shelf Temp. (°C) Time (minutes) VEGETABLES Subcategory Cooking Weight (Kg) Function Grilled vegetables Fresh 0.
Use Subcategory Cooking Weight (Kg) Function MW (W) Shelf Temp. (°C) Time (minutes) Bundt cake Fresh 1 - 1 160 60 Biscuits Fresh 0.6 - 1 160 18 Muffins Fresh 0.5 - 1 160 18 Profiteroles Fresh 0.5 - 1 180 70 Meringues Fresh 0.3 - 1 120 90 Sponge cake Fresh 1 - 1 160 60 Strudel Fresh 0.5 300 1 180 15 Tart Fresh 0.8 - 1 170 40 Brioche bread Fresh 1 - 1 180 40 Croissants Fresh 0.6 - 1 160 30 MW (W) Shelf Temp.
Use PIZZA Subcategory Cooking Weight (Kg) MW (W) Shelf Temp. (°C) Time (minutes) 1 - 1 250 9 Function Pan baked pizza Fresh Pizza Frozen 0.3 - 1 250 8 Stone baked pizza Fresh 0.5 - 1 250 6 MW (W) Shelf Temp. (°C) Time (minutes) PASTA Subcategory Cooking Weight (Kg) Function Pasta bake Fresh 2 - 1 220 40 Lasagne Fresh 2 - 1 230 35 Lasagne Frozen 0.3 500 1 230 9 Paella Fresh 0.5 - 1 190 25 Quiche Fresh 1 - 1 200 40 Soufflé Fresh 0.
Use Adding a recipe This menu allows you to enter a personal program with the parameters you wish to use. On first use, the appliance will only offer you to add a new recipe. After storing your personal recipes, these will then be available in the relative menu. 1. Select add from the “personal programs” menu. Select the personal programs EN 3.7 Personal programs icon on the “home screen”. All parameters which can be changed will be highlighted in yellow on the main screen.
Use • Cooking function 3. Make the required changes. 4. Press the symbol to store the recipe. The appliance will ask you to enter a name for the recipe you have just created. • Cooking duration • Oven shelf 5. Enter the name of the recipe. The character deletes the previous letter (in the example, the recipe recipe 1 has been stored). The recipe name can contain maximum 10 characters, including spaces. The name must contain at least one character in order to store the recipe. • Weight of dish 6.
Use If you select no you will lose all changes made. Using a personal recipe 1. Select a previously saved personal recipe from the “personal programs” menu (in the example the recipe recipe 1 has been saved). 2. Select the start option. 8. If saving the recipe is confirmed the display will show confirmation of this. 3. Cooking will start with the parameters previously set for the recipe.
Use Modifying a personal recipe 2. Select the delete option. 1. Select a previously saved personal recipe from the “personal programs” menu (in the example the recipe recipe 1 has been saved). 3. Confirm the deletion. Select yes to permanently delete the recipe. 2. Select the change option. 4. If you confirm the deletion, the display will show confirmation of this. 3. Repeat the same steps starting from point 2 in chapter “Adding a recipe”. Deleting a personal recipe 1.
Use Delay cooking 4. Press the symbol 1. Select a previously saved personal recipe from the “personal programs” menu (in the example the recipe recipe 1 has been saved). 5. The appliance waits for the delay start time. 2. Select the function delayed option. EN to confirm. 3.8 Settings The product configuration can be set using this menu. Select the settings icon on the “home screen”. 3.
Use Language Clock Sets the interface language from those available. Allows you to change time displayed. 1. Select language from the “settings” menu. 1. Press the symbol or and select clock from the “settings” menu. 2. Press the symbols and the required language. 2. Enter the current time 3. Confirm the selected language. 118 to select 3. Press the symbol to confirm.
Use Allows the appliance to automatically lock the controls after one minute of normal operation without any intervention from the user. 1. Press the symbol or and select controls lock from the “settings” menu. 2. To confirm activation of the controls lock, select yes. During normal operation it is indicated by the indicator light coming on. To temporarily release the lock during cooking, press and hold the symbol for 3 seconds. One minute after the last setting the lock will become active again.
Use Eco-Logic This mode allows the appliance to limit the power used. Suitable for simultaneous use with further home appliances. If this option is enabled, the symbol will appear next to the function on the display. Sound Whenever one of the display symbols is pressed, the appliance beeps. This setting disables these sounds. 1. Press the symbol or and select sound from the “settings” menu. 1. Press the symbol or and select eco-logic from the “settings” menu. 2.
Use This mode allows the appliance to keep cooked food warm (at low temperatures) after cooking finishes with a cooking cycle for which a duration has been set (if this is not manually interrupted), without altering the taste and aromas obtained during cooking. The keep warm function will be activated as soon as cooking is finished; this is indicated by a series of beeps (see cooking or function ended). The screen below will be shown on the display after a few minutes. 1.
Use 2. To confirm activation of eco-light mode, select yes. Digital clock Displays the time in digital format. 1. Press the symbol or and select digital clock from the “settings” menu. To prevent the appliance from automatically turning the internal lamp off turn this mode to OFF. The manual on/off control is always available. Press the symbol , when available, to manually activate the oven light or the symbol to deactivate it. 2. To confirm activation of the digital clock, select yes.
Cleaning and maintenance 4.1 Instructions High temperatures inside the oven after use Danger of burns • Perform cleaning only after letting the appliance cool down. Improper use Risk of damage to surfaces • Do not use steam jets to clean the appliance. • Do not use cleaning products containing chlorine, ammonia or bleach on steel parts or parts with metallic finishes on the surface (e.g. anodizing, nickel- or chromium-plating). • Do not use abrasive or corrosive detergents (e.g.
Cleaning and maintenance 4.4 Food stains or residues 4.6 Cleaning the door glazing Do not use metallic sponges or sharp scrapers as they will damage the surfaces. Use ordinary non-abrasive products with the aid of wooden or plastic utensils if necessary. Rinse thoroughly and dry with a soft cloth or a microfibre cloth. Do not allow residues of sugary foods (such as jam) to set inside the oven. If left to set for too long, they might damage the enamel lining of the oven.
Removing racks/trays support frames Cleaning the top section Removing the guide frames enables the sides to be cleaned more easily. This operation should be performed each time the automatic cleaning cycle is used (on some models only). To remove the guide frames: 1. Unscrew the two fastening pins of the frame. The appliance is equipped with a tilting grill element that allows for easy cleaning of the upper part of the oven cavity. 1.
Cleaning and maintenance 4.8 Vapor Clean Vapor Clean is an assisted cleaning procedure which facilitates the removal of dirt. Thanks to this process, it is possible to clean the inside of the oven very easily. The dirt residues are softened by the heat and water vapour for easier removal afterwards. • Spray a water and washing up liquid solution inside the oven using a spray nozzle. Direct the spray against the side walls, upwards, downwards and towards the deflector.
Cleaning and maintenance 3. Press the symbol to confirm. The assisted cleaning cycle will start. EN 1. Select the Vapor Clean function from the “special functions” menu. 2. The duration and temperature of the cleaning cycle will appear on the display. 4. If the temperature inside the oven is too high, a warning buzzer and message on the display will instruct you to wait for it to cool. 5. A buzzer will indicate the end of the Vapor Clean cycle.
Cleaning and maintenance Setting timed Vapor Clean End of the Vapor Clean cycle It is possible to program the Vapor Clean start time, like any cooking function. 1. After selecting the Vapor Clean special function, press the symbol . 1. Open the door and wipe away the less stubborn dirt with a microfibre cloth. 2. Use an anti-scratch sponge with brass filaments on tougher encrustations. 3. In case of grease residues use specific oven cleaning products. 4. Remove the water left inside the oven.
What to do if... The display is completely off: • Check the mains power supply. • Check whether an omnipolar breaker on/upline of the appliance supply line is in the “ON” position. The appliance does not heat up: • Check whether it has been set in “demo” mode (for further details see “Demo mode (for showrooms only)”). The controls do not respond: • Check whether it has been set in “controls lock” mode (for further details see “Controls lock”).
Installation 5 Installation Fixed connection 5.1 Electrical connection Power voltage Danger of electrocution • Have the electrical connection performed by authorised technical personnel. • The appliance must be connected to earth in compliance with electrical system safety standards. • Disconnect the mains power supply. General information Check the grid characteristics against the data indicated on the plate.
Installation 5.3 Positioning Position of the power cable EN Heavy appliance Crushing hazard • Position the appliance into the cabinet cutout with the help of a second person. Pressure on the open door Risk of damage to the appliance • Never use the oven door to lever the appliance into place when fitting. • Avoid exerting too much pressure on the oven door when open. Heat production during appliance operation Risk of fire • Check that the piece of furniture material is heat resistant.
Installation Fastening bushings Appliance overall dimensions (mm) Remove the bushing covers inserted on the oven front. (front view) Mount the appliance into the recess. Secure the appliance to the piece of furniture using screws. Cover the bushings with the previously removed covers.
Installation EN Mounting under worktops (mm) (side view) Make sure that the piece of furniture rear/bottom part has an opening of approx. 60 mm.
Installation Mounting into a column (mm) Make sure that the top/rear part of the piece of furniture has an opening approx. 35-40 mm deep.
