Operation Manual

Use
61
EN
Each time the time/temperature knob is
pressed during a function, the parameters
will be cycled through in the following
order.
Temperature
Minute minder timer duration
Function duration
Programmed cooking duration (if timed
cooking has been selected)
Time display
In all states it is possible to modify the value
by turning the time/temperature knob to the
left or right. Keep the knob turned to
produce a faster increase or decrease.
Setting the time
When using the appliance for the first time,
or after a power failure, the symbol
will flash on the display. To be
able to start any cooking function, the
current time must be set.
1. Turn the time/temperature knob to set the
displayed hours (keep the knob turned to
produce a faster increase or decrease).
2. Press the time/temperature knob.
3. Turn the time/temperature knob to set the
minutes (keep the knob turned to
produce a faster increase or decrease).
4. Press the time/temperature knob to finish
adjustment.
It may become necessary to
change the current time, for
example for daylight saving time.
From the stand-by position, keep
the time/temperature knob turned
to the right or left until the hours
flash.
It is not possible to change the time
if the oven is ON.