Operation Manual

Use
68
Modifying the data set during
programmed cooking
During operation, it is possible to modify
programmed cooking duration:
1. When the indicator lights and
are lit steadily and the appliance is
waiting for cooking to start, press the
time/temperature knob twice. The
indicator light starts flashing.
2. Turn the time/temperature knob right or
left to alter the preset cooking time.
3. Press the time/temperature knob again.
The indicator light switches off and
the indicator light starts flashing. The
display shows the cooking end time.
4. Turn the time/temperature knob right or
left to delay the cooking end time.
5. After a few seconds the indicator lights
and stop flashing and programmed
cooking resumes its operation with the
new settings.
3.5 Cooking advice
General advice
• Use a fan assisted function to achieve
consistent cooking at several levels.
• It is not possible to shorten cooking times
by increasing the temperature (the food
could be overcooked on the outside and
undercooked on the inside).
Advice for cooking meat
• Cooking times vary according to the
thickness and quality of the food and to
consumer taste.
• Use a meat thermometer when roasting
meat, or simply press on the roast with a
spoon. If it is hard, it is ready; If not, it
needs another few minutes cooking.
To extend the cooking time
manually, press the time/
temperature knob again. The
appliance will resume its normal
operation with the previously
selected cooking settings.
Press and hold the function knob
down to switch off the appliance.
For safety reasons, it is not possible
to set the end of cooking time by
itself without setting the cooking
duration.
After modifying the cooking
duration, the end of cooking time
must be re-set.