Operation Manual

Cleaning and maintenance
86
Vapor Clean cycle setting
1. Press and turn the function knob to select
the Vapor Clean function . The
duration and temperature of the cleaning
cycle will appear on the display.
2. Press the function knob to start the
automatic cleaning cycle.
Programmed Vapor Clean cycle
Like for the normal cooking functions, it is
also possible to set an end time for the
Vapor Clean function.
1. After selecting the Vapor Clean function,
press the time/temperature knob. The
indicator light starts flashing. The
display shows the function end time.
2. Turn the time/temperature knob right or
left to delay the cooking end time.
3. Press the time/temperature knob to
confirm the function end time.
4. Press the function knob. The appliance
waits for the set start time.
If the internal temperature is
greater than that required for the
Vapor Clean cycle, the cycle will
be stopped immediately and the
message will appear
on the display. Let the appliance
cool down before activating the
assisted cleaning cycle.
The temperature and time
parameters cannot be modified by
the user.