Contents 1.1 1.2 1.3 1.4 1.5 1.6 1.7 General safety instructions Appliance purpose Manufacturer’s liability This user manual Identification plate Disposal How to read the user manual 2 Description 2.1 2.2 2.3 2.4 General Description Control panel Other parts Available accessories 3 Use 3.1 3.2 3.3 3.4 3.5 Instructions Cleaning the appliance Removing the door Cleaning the door glazing Vapor Clean: Assisted oven cleaning (on some models only) Extraordinary maintenance 5 Installation 5.1 5.2 5.3 5.
Instructions 1 Instructions 1.1 General safety instructions Risk of personal injury • During use the appliance and its accessible parts become very hot. Never touch the heating elements during use. • Protect your hands by wearing oven gloves when moving food inside the oven. • Never try to put out a fire or flames with water: Turn off the appliance and smother the flames with a fire blanket or other appropriate cover.
• DO NOT USE OR STORE FLAMMABLE MATERIALS NEAR THE APPLIANCE. • DO NOT USE AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILST IT IS IN USE. • DO NOT MODIFY THIS APPLIANCE. • Have qualified personnel carry out installation and assistance interventions according to the standards in force. • Do not try to repair the appliance yourself or without the intervention of a qualified technician. • Do not pull the cable to remove the plug. Risk of damaging the appliance • Do not use abrasive or corrosive detergents (e.
Instructions • Do not use plastic cookware or containers when cooking food. • Do not put sealed tins or containers in the oven. • Remove all trays and racks which are not required during cooking. • Do not cover the bottom of the oven cavity with aluminium or tin foil sheets. • Do not place pans or trays directly on the bottom of the oven cavity. • If you wish to use greaseproof paper, place it so that it will not interfere with the hot air circulation inside the oven.
• If the power supply cable is damaged, contact technical support immediately and they will replace it. • Always use any necessary/ required personal protective equipment (PPE) before performing any work on the appliance (installation, maintenance, positioning or movement). • Before performing any work on the appliance, switch off the power supply. • This appliance can be used up to a maximum altitude of 4,000 metres above sea level.
Instructions 1.4 This user manual This user manual is an integral part of the appliance and must therefore be kept in its entirety and within the user’s reach for the whole working life of the appliance. Read this user manual carefully before using the appliance. 1.5 Identification plate The identification plate bears the technical data, serial number and brand name of the appliance. Do not remove the identification plate for any reason. 1.
Instructions Plastic packaging Danger of suffocation • Do not leave the packaging or any part of it unattended. • Do not let children play with the plastic bags. 1.7 How to read the user manual This user manual uses the following reading conventions: Instructions General information on this user manual, on safety and final disposal.
Description 2 Description 2.
Description EN 2.2 Control panel Multifunction models Models with pizza stone 1 Timer knob 2 Thermostat indicator light It allows you to use the minute minder timer or to perform manual cooking. It turns on to indicate that the oven is heating. It turns off when the temperature is reached. When it switches on and off regularly, it indicates that the oven temperature is being kept constant.
Description 3 Temperature knob Interior lighting This knob can be used to select the cooking temperature. Turn the knob clockwise to the required value between the minimum and the maximum. The appliance’s interior lighting comes on: • When the door is opened (on some models only). • When any function is selected, apart from the function (where present). 4 Function knob The various oven functions are suitable for different cooking modes.
Description Useful for collecting fat from foods placed on the rack above and for cooking pies, pizzas and baked desserts. Pizza stone cover (on some models only) EN Pizza stone (on some models only) To be placed in the housing on the base of the oven in place of the pizza stone when this is not being used. Specially designed for cooking pizza and similar dishes. Pizza spatula (on some models only) For easily placing the pizza on the pizza stone.
Use 3 Use 3.1 Instructions High temperature inside the oven during use Danger of burns • Keep the oven door closed during cooking. • Protect your hands by wearing oven gloves when moving food inside the oven. • Do not touch the heating elements inside the oven. • Do not pour water directly onto very hot trays. • Do not allow children to approach the appliance when it is in operation. Improper use Risk of damage to surfaces • Do not cover the bottom of the oven cavity with aluminium or tin foil sheets.
3.3 Using the accessories Tray rack Racks and trays The tray rack has to be inserted into the tray. In this way fat can be collected separately from the food which is being cooked. Racks and trays have to be inserted into the side guides until they come to a complete stop. • The mechanical safety locks that prevent the rack from being removed accidentally must face downwards and towards the back of the oven cavity.
Use 3.4 Using the oven With the appliance cold, remove the cover from the bottom and insert the pizza stone. Make sure that the stone is inserted correctly in the recess provided. For cooking use the special pizza function Pizza spatula (on some models only) Always grip the pizza spatula by the handle when moving food to avoid the risk of burns.
Cooking (and preheating) times are longer with the ECO function and may depend on the amount of food in the oven cavity. The ECO function is a delicate cooking function and is recommended for cooking that does not require temperatures higher than 210°C. It is recommended that you select a different function for cooking at higher temperatures. Static As the heat comes from above and below at the same time, this system is particularly suitable for certain types of food.
Use 52 Fan + lower element (on some models only) The combination of the fan with just the lower heating element allows cooking to be completed more rapidly. This system is recommended for sterilising or for finishing off the cooking of foods which are already well-cooked on the surface, but not inside, which therefore need a little more heat. Perfect for any type of food. In pyrolytic models, the special defrost and proving functions are brought together under the same function.
3.5 Cooking advice General advice • Use a fan assisted function to achieve consistent cooking at several levels. • It is not possible to shorten cooking times by increasing the temperature (the food could be overcooked on the outside and undercooked on the inside). Advice for cooking meat • Cooking times vary according to the thickness and quality of the food and to consumer taste. • Use a meat thermometer when roasting meat, or simply press on the roast with a spoon.
Use Cooking information table Weight (Kg) Function Shelf Temperature (°C) Time (minutes) Lasagne Pasta bake 3-4 3-4 Static Static 1 1 220 - 230 220 - 230 45 - 50 45 - 50 Veal roast Pork loin Sausages Roast beef Roast rabbit Turkey breast Roast pork neck Roast chicken 2 2 1.5 1 1.5 3 2-3 1.
Cleaning and maintenance 4.1 Instructions Improper use Risk of damage to surfaces • Do not use steam jets to clean the appliance. • Do not use cleaning products containing chlorine, ammonia or bleach on parts made of steel or that have metallic surface finishes (e.g. anodizing, nickelor chromium-plating). • Do not use abrasive or corrosive detergents (e.g. scouring powders, stain removers and metallic sponges) on glass parts. • Do not use rough or abrasive materials or sharp metal scrapers.
Cleaning and maintenance 2. Grasp the door on both sides with both hands, lift it forming an angle of around 30° and remove it. Removing the internal glass panes For easier cleaning the internal glass panes of the door can be removed. 1. Remove the internal glass pane by pulling the rear part gently upwards, following the movement indicated by the arrows (1). 2. Then, pull the front part upwards (2). This way, the 4 pins attached to the glass detach from their housings in the oven door. 3.
Cleaning and maintenance 5. Refit the panes in the reverse order in which they were removed. 6. Reposition the internal glass pane. Take care to centre and insert the 4 pins into their housings in the oven door by applying slight pressure. Removing rack/tray support frames Removing the rack/tray support frames enables the sides to be cleaned more easily. This operation should be performed each time the automatic cleaning cycle is used (on some models only). To remove the rack/tray support frames: 1.
Cleaning and maintenance Removing self-cleaning panels and racks/trays support frames (fitted only to some models) Removing the guide frames enables the sides to be cleaned more easily. This operation should be performed each time the automatic cleaning cycle is used (on some models only). To remove the guide frames: Pull the frame towards the inside of the oven to unhook it from its groove A, then slide it out of the seats B at the back.
On pizza models only: Cleaning the pizza stone Remove in sequence the pizza stone cover (1) and the base (2) on which it is placed. The base has to be lifted a few millimetres, then pulled outwards. The pizza stone should be washed separately according to the following instructions: The stone must be cleaned after every use. Do not heat it again if it has any encrustations.
Cleaning and maintenance 4.5 Vapor Clean: Assisted oven cleaning (on some models only) Vapor Clean is an assisted cleaning procedure which facilitates the removal of dirt. Thanks to this process, it is possible to clean the inside of the oven very easily. The dirt residues are softened by the heat and water vapour for easier removal afterwards. Improper use Risk of damage to surfaces • Remove any food residues or large spills from previous cooking operations from the inside of the oven.
Cleaning and maintenance • Close the door. We recommend spraying approx. 20 times at the most. Vapor Clean cycle setting End of the Vapor Clean cycle 4. Open the door and wipe away the less stubborn dirt with a microfibre cloth. 5. Use a non-scratch sponge with brass filaments on hard to remove deposits. 6. In case of grease residues use specific oven cleaning products. 7. Remove the water left inside the oven.
Cleaning and maintenance 4.6 Extraordinary maintenance Installing and removing the seal To remove the seal: • Release the clips located in the 4 corners and pull the seal outwards. Replacing the internal light bulb Live parts Danger of electrocution • Unplug the appliance. 1. Completely remove all accessories from inside the oven. 2. Remove the rack/tray support frames. 3. Remove the bulb cover using a tool (e.g. a screwdriver). Pay attention not to scratch the oven cavity enamel.
Cleaning and maintenance EN 4. Slide out and remove the light bulb. Do not touch the halogen light bulb directly with your fingers, but wrap it in insulating material. 5. Replace the light bulb with one of the same type (40W). 6. Refit the cover. Ensure the moulded part of the glass (A) is facing the door. 7. Press the cover completely down so that it attaches perfectly to the bulb support.
Installation 5 Installation 5.1 Electrical connection Power voltage Danger of electrocution • Have the electrical connection performed by authorised technical personnel. • The appliance must be connected to earth in compliance with electrical system safety standards. • Disconnect the mains power supply. General information Check the grid characteristics against the data indicated on the plate.
Installation 5.3 Positioning Position of the power cable EN Heavy appliance Crushing hazard • Position the appliance into the cabinet cut-out with the help of a second person. Pressure on the open door Risk of damage to the appliance • Never use the oven door to lever the appliance into place when fitting. • Avoid exerting too much pressure on the oven door when open.
Installation Fastening bushings 1. Remove the bushing covers on the front of the appliance. 2. Mount the appliance into the recess. 3. Secure the appliance to the carcase using the screws. 4. Cover the bushings with the previously removed covers.
Installation EN Mounting under worktops (mm) Make sure that the carcase rear/ bottom section has an opening of approx. 60 mm.
Installation Mounting into a column (mm) Make sure that the carcase top/ rear section has an opening approx. 35-40 mm deep.
Installation 5.4 Instructions for the installer EN • The plug must be accessible after installation. Do not bend or trap the power cable. • The appliance must be installed according to the installation diagrams. • If the appliance does not work correctly after having carried out all the checks, contact your local Authorised Service Centre. • Once the appliance has been installed, please explain to the user how to use it correctly. Testing At the end of installation, carry out a brief inspection test.
