Operation Manual

Cleaning and maintenance
125
EN
3. Press the control knob twice to start the
cleaning cycle.
4. A buzzer will indicate the end of the
vapor clean cycle.
Setting the programmed Vapor Clean
cycle
It is possible to program the vapor clean
cycle start time, like any cooking function.
1. After selecting the vapor clean special
function, press the control knob. The
display shows the current time and the
symbol comes on.
2. Turn the control knob to set the time you
wish the vapor clean cycle to finish.
3. After a few seconds, the symbols
and remain steady and the
appliance waits for the set start time to
start the cleaning cycle.
The duration and temperature
parameters cannot be changed by
the user.