User Manual

Cleaning and maintenance
46
4. Open the oven door.
5. Rest the container on the open door.
6. Extract the tube from its seat and immerse
its end in the container until it reaches all
the way to the bottom.
7. Press the function knob to start drawing
the solution into the appliance's tank.
8. When the appliance has finished taking
in water, shake the tube to remove any
residual water.
9. Return the tube to its original position,
remove the container of solution and
close the door.
10. Press the function knob to start the tank
cleaning process. The display will show
the time left until the end of the cleaning
cycle.
Note: the container with the
solution must have a gross weigh
lower than 5 kg.
The appliance will automatically
draw sufficient solution to fill the
tank.
When the door is closed, an
automatic system will automatically
draw in any residual solution in the
tube to avoid drips.