User Manual

Use
21
EN
Setting the time
On the first use, or after a power failure,
will flash on the appliance’s
display. To be able to start any cooking
function, the current time must be set.
1. Turn the programming knob to set the
time displayed (keep the knob turned to
increase or decrease it more quickly).
2. Press the programming knob.
3. Turn the programming knob to set the
number of minutes (keep the knob
turned to increase or decrease it more
quickly).
4. Press the programming knob to end the
adjustment.
Minute minder
1. Press the programming knob once
(twice if cooking is already in
progress). The display shows the digits
and the indicator light
flashes.
2. Turn the programming knob to set the
duration (from 1 minute to 4 hours).
After a few seconds, the indicator
light stops flashing and the countdown
starts.
3. Wait for the buzzer to indicate that the
time has finished. The
indicator
light flashes.
4. Turn the programming knob to select
another minute minder. Or press the
programming knob to stop the buzzer.
It may become necessary to
change the current time, for
example for daylight saving time.
From the standby position, keep
the programming knob turned to
the right or left until the time flashes.
It is not possible to change the time
if the appliance is ON.
This function only activates the
buzzer, without stopping cooking.
The minute minder can be
activated both during cooking and
when the appliance is in standby.