User Manual

Cleaning and maintenance
41
EN
Pyrolytic
1. Approximately two minutes after the
pyrolytic cycle has started the
indicator light comes on to indicate that
the door has been locked by a device
that prevents it from being opened.
2. At the end of the Pyrolytic cycle,
“STOP” flashes on the display and a
buzzer will sound that can be
deactivated by opening the door or
pressing/turning one of the two knobs.
3. The door remains locked until the
temperature inside the oven cavity
returns to a safe level. Wait for the oven
to cool down (the indicator light
turns off) and collect the residues
deposited in the oven cavity using a
damp microfibre cloth.
It is not possible to select any
function once the door lock device
has been activated.
During the first Pyrolytic cycle,
unpleasant odours may occur due
to the normal evaporation of oily
substances used during
manufacturing. This is absolutely
normal and disappears after the
first Pyrolytic cycle.
During the Pyrolytic cycle, the fans
are louder due to a greater speed
of rotation. This is an absolutely
normal operation, intended to
provide more effective heat
dispersal. At the end of the
Pyrolytic cycle, the fans will
continue to operate for long
enough to prevent overheating the
sides of adjacent units and the front
of the oven.
If the Pyrolytic cycle gives
unsatisfactory results at minimum
duration, it is recommended to set
a longer time for subsequent
cleaning cycles.