Operation Manual

Cleaning and maintenance
123
EN
Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle
start time like all other cooking functions.
1. After choosing the duration of the
pyrolytic function and pressing the
symbol to confirm, press the symbol.
2. Press on function delayed.
3. Enter the time at which you require
cooking to end (for example 19:30: first
touch the hours box, then the numbers 1
and 9; touch the minutes box, then the
numbers 3 and 0).
4. Press the symbol to confirm.
5. The appliance waits until the set start time
to start the cleaning cycle.
4.5 Extraordinary maintenance
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-
abrasive sponge and wash with
lukewarm water.
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the rack/tray support frames.
3. Remove the bulb cover using a tool (e.g.
a screwdriver).
Live parts
Danger of electrocution
• Unplug the oven.
Live parts
Danger of electrocution
• Unplug the appliance.
Pay attention not to scratch the oven
cavity enamel.