User manual

Use
25
EN
Programmed cooking
1. After selecting a cooking function and
temperature, press the temperature knob
three times. The display shows
and the indicator light
flashes.
2. Turn the knob right or left to set the
cooking duration from 00:01 to 12:59.
Keep the knob turned to increase or
decrease it more quickly.
3. Press the temperature knob a fourth time.
The indicator light flashes. Turn the
knob right or left to set the end of
cooking time.
4. After a few seconds the and
indicator lights stop flashing. The
appliance waits for the set start time.
Programmed cooking is the
function that allows cooking to
stop automatically at a time set by
the user, after which the appliance
will switch off automatically.
To extend the cooking time
manually, press the temperature
knob again. The appliance will
resume its normal operation with
the previously selected cooking
settings.
With programmed cooking, the
oven is switched on 10 minutes in
advance to allow the appliance to
reach the cooking temperature
(preheating).