User manual

Cleaning and maintenance
41
EN
Cleaning the top of the oven cavity (not
on pyrolytic models)
The appliance is equipped with a tilting grill
element that allows for easy cleaning of the
upper part of the oven compartment.
1. Free the upper heating element by gently
lifting it and rotating its retaining latch by
90 degrees.
2. Gently lower the heating element until it
stops.
3. When you have finished cleaning, place
the heating element back in position and
turn the retaining latch to lock it in place.
Cleaning the bottom of the oven (some
models only)
1. Remove in sequence the pizza stone
cover (1) and the base (2) on which it
rests. The base has to be lifted a few
millimetres, then pulled outwards.
2. Lift the end of the bottom heating element
(3) by a few centimetres and clean the
bottom of the oven cavity.
3. Put the pizza stone base back in place,
pushing it in until it is against the back of
the oven cavity, and push it down so that
the heating element plate fits into the
base itself.
High temperature inside the oven
during use
Danger of burns
• The following must only be carried out
when the oven is completely cold and
switched off.
Improper use
Risk of damage to the appliance
• Do not excessively flex the element
during cleaning.