User manual

Cleaning and maintenance
44
Vapour Clean setting
1. Press and turn the function knob to select
the Vapour Clean function. The
duration and temperature of the cleaning
cycle will appear on the display.
2. Press the function knob to start the
automatic cleaning cycle.
Programmed Vapour Clean
Just like with normal cooking functions, it is
also possible to set an end time for the
Vapour Clean function.
1. After having selected the Vapour Clean
function, press the temperature knob. The
indicator light will start flashing. The
display shows the function end time.
2. Turn the temperature knob right or left to
delay the cooking end time.
3. Press the temperature knob to confirm the
function end time.
4. Press the function knob. The appliance
waits for the set start time.
If the internal temperature is higher
than that required for the Vapour
Clean function, the cycle will be
stopped immediately and
will appear on the
display. Leave the appliance to
cool down before activating the
assisted cleaning cycle.
The temperature and time
parameters cannot be modified by
the user.