User manual

Cleaning and maintenance
46
Pyrolytic function setting
1. Use the function knob to select one of the
cleaning functions or .
2. Turn the temperature knob to the right or
to the left to set the duration of the
cleaning cycle from a minimum of 2
hours to a maximum of 3 hours (except
for the function whose duration is
120 minutes).
3. Press the temperature knob to start the
pyrolytic cycle.
Pyrolytic
1. The display indicates or and
the remaining time to indicate that the
appliance is carrying out the automatic
cleaning cycle.
2. Two minutes after the pyrolytic cycle has
started, the door is locked (the door lock
indicator light
comes on) by a
device that prevents the door from being
opened.
3. At the end of the pyrolytic cycle, the door
remains locked until the temperature
inside the oven cavity returns to a safe
level. Wait for the oven cavity to cool
down and collect the residues deposited
inside using a damp microfibre cloth.
Recommended pyrolytic cycle
duration:
• Light dirt: 2 hours.
• Medium dirt: 2 ½ hours.
• Heavy dirt: 3 hours.
It is not possible to select any
function once the door lock device
has been activated.
During the first pyrolytic cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolytic cycle.
During the pyrolytic cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolytic cycle, the
fan will continue to operate long
enough to prevent the walls of
adjacent units and the front of the
appliance from overheating.
If the pyrolytic cycle gives
unsatisfactory results at minimum
duration, it is recommended to set
a longer time for successive
cleaning cycles.