User manual

Cleaning and maintenance
47
EN
Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle
start time.
1. After selecting the pyrolytic cycle
duration, press the temperature knob.
The display shows the current time and
the indicator light comes on.
2. Turn the temperature knob to set the time
at which you wish to complete the
pyrolytic cycle.
3. After a few seconds, the and
indicator lights remain on steadily and
the appliance waits for the set start time
to start the cleaning cycle.
4.7 Extraordinary maintenance
Removing and installing the oven seal
(not on pyrolytic models)
To remove the oven seal:
• Release the hooks in the 4 corners and
pull the oven seal outwards.
To install the oven seal:
• Attach the hooks in the 4 corners of the
oven seal.
Oven seal maintenance
recommendations
The oven seal should be soft and flexible.
• To keep the oven seal clean, wash it
using a non-abrasive sponge and
lukewarm water.
It is not possible to select any
function once the door lock device
has been activated.