User manual

Cleaning and maintenance
63
EN
• Completely remove all accessories from
inside the oven.
• Place the pizza plate cover in its housing
on the base of the oven, in place of the
pizza plate.
• Remove the rack/tray support frames.
• Remove the upper guard (where
present).
• Close the door.
Pyrolytic function setting
1. Turn the function knob to symbol .
2. Turn the setting knob to the left or right to
set the cleaning cycle time from a
minimum of 2 hours to a maximum of 3
hours.
3. Press the setting knob to start the pyrolytic
cycle.
Pyrolytic cycle
After selecting the pyrolytic cycle time, the
thermostat light will start flashing and the
oven will begin to heat up.
Two minutes after the pyrolytic cycle has
started the door is locked (the door lock
indicator light comes on) by a device that
prevents the door from being opened.
During the pyrolytic cycle is possible to
modify its duration.
4. Press the setting knob. The timed cooking
indicator light flashes on the clock.
5. Turn the setting knob to the left or right
within 5 seconds to set the new cooking
end time.
When the pyrolytic cycle has finished, a
buzzer will indicate the end of the
automatic cleaning cycle.
6. Return the function knob to the 0 position.
Recommended pyrolytic cycle
duration:
• Light dirt: 120 minutes.
• Medium dirt: 150 minutes.
• Heavy dirt: 180 minutes.
It is not possible to select any
function once the door lock device
has been activated.
A pyrolytic cycle can be
interrupted at any time by turning
the function knob to the 0 position.