User manual

Use
116
According to the page that is displayed, the
following buttons may also be present:
Connectivity (on some models only)
Connectivity requirements:
• Smartphone or tablet running iOS
version 10.x or later or Android
version 5.1 or later.
•Wi-Fi network (2.4 GHz band, WPA2
protected setup) active and available in
the place where the appliance is
installed.
• Internet connection.
• Name and password of the home Wi-Fi
network or WPS mode (Wi-Fi Protected
Setup) available.
For further information, please refer to the
“Built-in oven connectivity manual”.
First use
To switch on the appliance:
1. Connect the appliance to the mains
power supply.
The manufacturer’s logo will appear for a few
seconds on the display .
Then the current time display will appear
with the time field flashing.
BACK
CONFIRM
START
REPLAY
STOP
SAVE
DELETE
DOOR LOCK
RAPID PRE-HEATING
PROBE (if fitted)
Press and hold the HOME
button for a few seconds to stop
cooking immediately at any time
and return to the main menu.
The following instructions are also
valid in the case of a prolonged
power failure.
After the appliance is switched on,
you will need to wait a few
seconds before you can use it.