Instruction manual

Cleaning and maintenance
69
EN
4.5 Cleaning the water circuit
Rinse
1. Select rinse from the “special functions”
menu.
The following appears on the appliance’s
display in order to carry out the rinsing
procedure:
2. Press continue to start the rinsing
procedure.
The display shows the request to fill the
reservoir.
3. Place a litre of clean water into a jug.
4. Open the oven door.
5. Place the jug on the open door.
If the appliance has been unused
for a long time, it is recommended
to rinse the water circuit.
The rinsing procedure consists of
two phases, each involving 5
steps.
PLEASE NOTE: if you decide to
continue, it will not be possible to
cancel or interrupt the rinsing
procedure.
PLEASE NOTE: the jug together
with the water must not weigh
more than 5 kg.