Owner Manual

Use
18
At this point it is possible to set programmed
cooking.
If you do not wish to set timed cooking, just
wait a few seconds until the indicator light
starts flashing, otherwise
continue from step 10.
If you do wish to set timed cooking,
proceed as follows:
7. While the programmed cooking
indicator light is flashing, turn the
temperature knob to the right or left to set
the cooking end time.
8. Press the temperature knob to confirm the
cooking end time. The programmed
cooking indicator light remains on
steadily.
9. After a few seconds, the indicator light
flashes on the display.
10. Press the function knob. A request to fill
the reservoir with water is shown on the
display.
Filling the reservoir
11. Fill the jug provided (or a container)
with sufficient water for the cooking
duration.
12. Open the oven door.
13. Place the jug (or container) on the open
door.
Programmed cooking is the
function which allows cooking to
be stopped at an established time
depending on the time set by the
user, after which the appliance will
switch off automatically.
• Use cold tap water which is not
too hard, softened water or still
mineral water.
• Do not use distilled water, tap
water with a high chloride
content (> 40 mg/l), or other
liquids.
Note: the jug (or container) with
the water must have a gross weight
lower than 5 kg.