Specifications Sheet

SHWG910X

smeg 90cm wallmount rangehood with glass canopy

ID041012

Code SHWG910X

EAN 9345025000989

ﬁnish stainless steel

dimensions 898mmW x 850–1050mm H x 490mmD

installation wallmount

motor 1 x 250W centrifugal

air extraction • duct direct to atmosphere — 150mm

diameter ducting required

• recirculate to kitchen — 125mm ducting

required

capacity 690m³/hr (IEC 61591: p=0)

660m³/hr (IEC 61591: p=1)

noise rating 45–68 dBA (IEC 60704-3)

illumination 2 X 20w halogen globes

speeds four, progressive button

maximum

current

0.17 amps

power supply 220–240V, 50Hz

supplied 2 x grease ﬁlters

optional charcoal ﬁlter, part # KITFC161

weight 23.6kg gross, 17.7kg net

package

dimensions

410x980x660mm

p = 0 airﬂow direct out of motor housing

p = 1 airﬂow after 1m & 90° bend + 1m

PAGE 1
SHWG910X smeg 90cm wallmount rangehood with glass canopy EAN 9345025000989 finish stainless steel dimensions 898mmW x 850–1050mm H x 490mmD installation wallmount motor 1 x 250W centrifugal air extraction • • duct direct to atmosphere — 150mm diameter ducting required recirculate to kitchen — 125mm ducting required capacity 690m³/hr (IEC 61591: p=0) 660m³/hr (IEC 61591: p=1) noise rating 45–68 dBA (IEC 60704-3) illumination 2 X 20w halogen globes speeds four, progressive button maximu
PAGE 2
70 850 minimum | 1050 maximum smeg 90cm wallmount rangehood with glass canopy 740 SHWG910X 650mm minimum PLEASE NOTE: drawings are not to scale. They are to assist only. WARNING: technical specifications and product sizes can be varied by the manufacturer without notice. Cutouts for appliances should only be by physical product measurements. The above information is indicative only.