Instruction manual

Problem Possible cause Remedy
There is no sound when you
touch the panel sensor
fields.
The sounds are deactivated. Activate the sounds. Refer
to "Daily use".
The flexible induction cook‐
ing area does not heat up
the cookware.
The cookware is in a wrong
position on the flexible in‐
duction cooking area.
Place the cookware in the
correct position on the flexi‐
ble induction cooking area.
The position of the cook‐
ware depends on the activa‐
ted function or function
mode. Refer to "Flexible in‐
duction cooking area".
The diameter of the bottom
of the cookware is incorrect
for the activated function or
function mode.
Use cookware with a diame‐
ter applicable to the activa‐
ted function or function
mode. Use cookware with a
diameter smaller than 160
mm on a single section of
the flexible induction cook‐
ing area. Refer to "Flexible
induction cooking area".
comes on.
Automatic Switch Off oper‐
ates.
Deactivate the hob and acti‐
vate it again.
comes on.
Child Safety Device or Lock
operates.
Refer to "Daily use".
comes on.
There is no cookware on the
zone.
Put cookware on the zone.
The cookware is unsuitable. Use suitable cookware. Re‐
fer to "Hints and tips".
The diameter of the bottom
of the cookware is too small
for the zone.
Use cookware with correct
dimensions. Refer to "Tech‐
nical data".
Flexi4Zone operates. One or
more sections of the func‐
tion mode which operates
are not covered by the cook‐
ware.
Place the cookware on the
correct number of sections
of the function mode which
operates or change the
function mode. Refer to
"Flexible induction cooking
area".
Flexi-Heat operates. Two
pots are placed on the flexi‐
ble induction cooking area.
Use only one pot. Refer to
"Flexible induction cooking
area".
20