Instruction manual
Table Of Contents
- 1. INSTRUCTIONS FOR USE
- 2. SAFETY PRECAUTIONS
- 3. ENVIRONMENTAL CARE
- 4. GET TO KNOW YOUR APPLIANCE
- 5. USING THE COOKING HOB
- 5.1 General warnings and advice
- 5.2 Control panel
- 5.3 Switching on and off the hob
- 5.4 Switching on the cooking zone
- 5.5 Switching off the cooking zone
- 5.6 Residual heat
- 5.7 Power Function
- 5.8 Pause function
- 5.9 Timer
- 5.9.1 Setting the timer
- 5.9.2 End of set time
- 5.9.3 Deactivating the timer
- 5.10.1 Setting the cooking time
- 5.10.2 Changing the set time
- 5.10.3 End of set time
- 5.12.1 Activating the bridge function
- 5.12.2 Deactivating the bridge function
- 5.13.1 Activating the control lock
- 5.13.2 Deactivating the control lock
- 6. CLEANING AND MAINTENANCE
- 7. TROUBLESHOOTING
- 8. INSTALLATION
47
Instructions for the installer
8.4 Ventilation
The illustrations below show two examples of installation suitable for proper ventilation and one example
of incorrect installation to be avoided.
Do not obstruct the ventilation grille in front of the product in any type of installation.
8.5 Hob seal
To prevent leakage of liquid between the frame of
the hob and the work surface, place the seal
provided along the entire outer edge of the hob
before assembly.
Do not fix the hob using silicone as this would make it impossible to remove the hob, if necessary,
without damaging it.