Instruction manual
Table Of Contents
- 1. INSTRUCTIONS FOR USE
- 2. SAFETY PRECAUTIONS
- 3. ENVIRONMENTAL CARE
- 4. GET TO KNOW YOUR APPLIANCE
- 5. USING THE COOKING HOB
- 5.1 General warnings and advice
- 5.2 Control panel
- 5.3 Switching on and off the hob
- 5.4 Switching on the cooking zone
- 5.5 Switching off the cooking zone
- 5.6 Residual heat
- 5.7 Power Function
- 5.8 Pause function
- 5.9 Timer
- 5.9.1 Setting the timer
- 5.9.2 End of set time
- 5.9.3 Deactivating the timer
- 5.10.1 Setting the cooking time
- 5.10.2 Changing the set time
- 5.10.3 End of set time
- 5.12.1 Activating the bridge function
- 5.12.2 Deactivating the bridge function
- 5.13.1 Activating the control lock
- 5.13.2 Deactivating the control lock
- 6. CLEANING AND MAINTENANCE
- 7. TROUBLESHOOTING
- 8. INSTALLATION
50
Instructions for the installer
HOB TYPE
(CM)
POSSIBLE CONNECTION
TYPES
CABLE TYPE
(if not present)
70
380 - 415 V 2N~ 4-pole 4 x 2.5 mm² H05V2V2-F
220 - 240 V 1N~ 3-pole 3 x 4 mm² H05V2V2-F
Carefully read the wiring diagram plate underneath the appliance or around the power cable.
Use H05V2V2-F cables withstanding a temperature of at least 90°C.
The aforementioned power cables are sized taking into account the coincidence factor (in compliance
with standard EN 60335-2-6).