User's Manual

Use
52
Double Booster Function
The Double Booster function allows more
power to be supplied compared to the
Booster function.
After having activated the Booster function
for a cooking zone, press the far right of
the scroll bar again. The symbols ,
and will be displayed in sequence.
Multizone function
After switching on the hob:
1. Place two small pans or one long pan on
vertically connected zones.
2. The number icons relative to the cooking
zones involved show .
3. The flashing and symbols
appear at the side of the number icons.
These symbols indicate that the
Multizone function can be activated.
To activate the Multizone function:
1. Touch the scroll bars of the relevant zones
at the same time. The and
symbols stop flashing.
2. Once the function has been activated,
only the left hand side number icon
remains active.
3. Use the left-hand side scroll bar to set the
required cooking power for both zones.
The Booster function remains active
for a maximum of 10 minutes, after
which the power is reduced
automatically to level 9.
This function can be used to
operate two cooking zones (front
and rear) when using pans such as
fish kettles or long pans.
This function automatically divides
the power equally between both
of the hot plates in use.
After having arranged the pans
(when switching on or with the hob
already on), if you wish to use two
cooking zones independently,
wait 5 seconds until the Multizone
function symbols disappear.
It is only possible to activate the
Multizone function between
cooking zones that are vertically
connected (F and R).