User's Manual

Use
57
EN
Timed cooking
To activate the timed cooking function, first
turn on the hob, then:
1. Place a pan on the cooking zone and
select a power level.
2. Press the and buttons at the
same time. The icon appears at the
side of the number icon of the zone.
3. Use the and buttons to select
the required time; hold the buttons down
to advance more quickly.
4. Timed cooking will start a few seconds
after the last selection.
5. When the time elapses, a series of beeps
will sound. Press the - or + button to
deactivate the buzzer.
Modifying or deactivating timed cooking
To modify or reset timed cooking, simply
follow the same instructions for modifying or
resetting the minute minder timer.
If several timed cooking functions have
been set, press the and buttons
at the same time to move to the timer of
each cooking zone and modify them
individually. Each selected timer is indicated
by the icon at full brightness, while the
other icons are partially dimmed.
Recall Function
If the appliance is switched off
unintentionally, carry out the following
procedure within 6 seconds:
1. Switch on the appliance.
• The LED above the button will start
to flash.
2. Press the pause button immediately
to restore the functions that were
previously active.
• This function is used to program
the automatic switch-off of each
cooking zone at the end of a
period of time.
• A maximum of 1 hour
and 59 minutes can be set.
• This function can be activated on
multiple cooking zones at the
same time.
• When the timer of another
cooking zone is activated, the
clock icon of the previously
selected zone will dim slightly.
An independent timer can be set
during one or several timed
cooking functions.
This is used to restore some
functions that have already been
started after the appliance has
been switched off unintentionally.