User manual

Use
69
EN
Option U6 allows you to activate or
deactivate the automatic pan detection
function. (see “Switching on the cooking
zone automatically”).
0: automatic detection off.
1: automatic detection on.
Option U7 specifies the length of the alarm
when the timer has finished. 3 levels can be
selected:
0: alarm duration 120 seconds.
1: alarm duration 10 seconds.
2: alarm disabled.
Option U8 allows you to activate the Auto-
Vent 2.0 function in automatic mode. 8
levels can be selected. The following table
summarises the possible settings:
Refer to the following table to choose the
most suitable value according to the power
limitation of the appliance:
Option U9 allows you to activate or
deactivate the Auto-Vent 2.0 function:
0: function off.
1: function on.
Exiting the user menu
There are two ways to exit from the user
menu:
1. Press the button. Any modifications
will be discarded and the hob will be
switched off.
Or
2. Press and hold the On/Off button
for at least 2 seconds. The modifications
will be saved and the hob will be
switched off.
If automatic pan detection is
disabled, the area must be
switched on manually when a pan
is placed on the hob.
Hardness
level
Hood
lighting
Hood fan speed
Delicate
cooking
Medium
cooking
Intense
cooking
0 off off
1 on off
2 - 4 - 6 on off speed 1 speed 2
3 - 5 - 7 on speed 1 speed 2 speed 3
Hardness level Power limitation
2 - 3 up to 4 kW
4 - 5 from 4 to 5 kW
6 - 7 from 5 to 11.1 kW
If you select a higher power level
compared to the one that has
been set, it may not be possible to
select some of the hood fans
speeds.