User manual

USE - 3591477A053/B
e
Booster function
The Booster function allows you to heat a pan at
maximum power for a limited amount of time. It
can be used to bring a large amount of water to
the boil rapidly.
After switching on the hob and having selected
a zone:
1. Swipe your finger from the far left to the far
right of the scroll bar.
2. The Booster function will be activated and
the symbol appears on the cooking
zone display.
To deactivate the Booster function, simply
decrease the power level of the cooking zone
or switch off the appliance.
Double Booster Function
The Double Booster function allows more
power to be supplied compared to the Booster
function.
After having activated the Booster function for a
cooking zone, press the far right of the scroll bar
again. The symbols , and will be
displayed in sequence to indicate that the
Double Booster function is on.
To deactivate the function, simply select any
other power level or switch off the appliance.
Bridge function (on some zones only)
This function allows you to operate two cooking
zones (front and rear) at the same time when
using pans such as fish kettles or long pans.
After switching on the hob:
1. Place two small pans or one long pan on
the vertically connected zones.
2. The displays of the cooking zones involved
indicate .
3. The flashing and symbols appear
at the side of the displays. These symbols
indicate that the Bridge function can be
activated.
To activate the Bridge function:
1. Touch the scroll bars of the relevant zones at
the same time. The and symbols
stop flashing.
2. Once the function has been activated, only
the left hand side zone display remains
active.
3. Use the left-hand side scroll bar to set the
required cooking power for both zones.
If a large, oval or oblong pan is being used,
make sure that it is placed in the centre of the
cooking zone.
See General safety instructions.
The Booster function can also be
activated by a pressing the right end of
the scroll bar once.
The Booster function remains active for
a maximum of 5 minutes, after which the
power level of the zone returns to 9.
See General safety instructions.
This function automatically divides the
power equally between both zones that
are in use.
After having arranged the pans (when
switching on or with the hob already
on), if you wish to use two zones
independently, wait 5 seconds until the
and symbols disappear.
It is not possible to activate the Double
Booster function for the cooking zones
on which the Bridge function is active.