User manual

USE - 3991477A053/B
e
progressive number on the timer display.
Accessing the user menu
1. If the hob is off, switch it on using the
button.
2. Press again within 3 seconds to switch it
off; the icon starts to flash.
3. Press the and buttons at the same
time until the graph bars appear above the
scroll bars of the right zones.
4. Press the centre of both scroll bars at the
same time to complete the access
procedure.
User options
Once you have accessed the user menu, the first
option that appears is the power limitation
option (option U0), which should only be
modified by the installer (see "Power limitation
procedure").
Use the and buttons to move between
the options.
To select the values for each option, press the
left half of the scroll bar to scroll backwards and
the right half to scroll forwards.
Option U1 (on some models only) allows you to
activate or deactivate the Auto-Vent 2.0
function:
• 0: function off.
• 1: function on.
Option U2 (on some models only) allows you to
configure the Auto-Vent 2.0 function in
automatic mode. 8 values can be selected. The
following table shows a summary of the possible
settings:
Refer to the table below to select the most
suitable value according to the power limitation
of the appliance:
Exiting the user menu
There are two ways to exit from the user menu:
1 Press the and buttons at the same
time for at least two seconds. All
modifications will be saved and the hob will
be switched off. It will then have to be turned
back on.
Or
Option Description
Power limitation (kW) - Modifica-
tion restricted to the installer
Activation and deactivation of the
Auto-Vent 2.0 function (on some
models only)
Auto-Vent 2.0 configuration in auto-
matic mode (on some models only)
Option restricted
Hardness level Hood lighting
Hood fan speed
Delicate cooking Medium cooking Intense cooking
0 Off Off
1On Off
2 - 4 - 6 On Off speed 1 speed 2
3 - 5 - 7 On speed 1 Speed 2 Speed 3
Hardness level Power limitation
2 - 3 up to 4 kW
4 - 5 from 4 to 5 kW
6 - 7 5 kW upwards
If the appliance is set to a lower power
level lower than the one indicated in the
table above, it may not be possible to
select some of the fan speeds.
For models that are not provided with a
wireless connection, options U1 and
U2 in the user menu will be visible, but
not accessible.