manual



HOWTOINSTALLYOURGLASSSPLASHBACK/UPSTAND



BEFORESTARTING:

•Readthechecklistatthebackoftheseinstructions.

•Readtheassemblyguideoverleaf.

•Checkthatyouhaveallthetoolsneeded(seeoverleaf).



FITTINGSTEPS–SPLASHBACKS/UPSTANDS



PAGE 1
HOW TO INSTALL YOUR GLASS SPLASHBACK / UPSTAND BEFORE STARTING: • Read the checklist at the back of these instructions. • Read the assembly guide overleaf. • Check that you have all the tools needed (see overleaf).
PAGE 2
Ensure the surface being fixed to is flat, non‐ porous, dry and dust free. First check the dimensions. Hold up the back of the splashback/ upstand to the worktop/ wall to check fit. Use the spacers to achieve a good fit. Take the splashback/ upstands away making sure to keep all corners safe from hard surfaces and then remove the covering from self adhesive backing. Fit the splashback on top of the spacers.
PAGE 3
IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. CHECK LIST • Do you have everything you need to start the job? • Check that the splashback / upstands fits. • Is it the right colour? • Ensure that your worktop is fitted securely. • Check that your worktop is level. • Clear all dust from the worktop.