User manual

54 - USE 914779557/C
Testing dishes
To check whether the cookware is suitable for
use with microwave cooking, carry out this
simple test:
1. Remove all accessories from the oven
cavity.
2. Place the cookware to be tested on the rack
inserted in the first shelf.
3. Select the microwave function at maximum
power level (e.g. 1000 W).
4. Set a cooking time of 30 seconds.
5. Start cooking.
At the end of the test the cookware must be
either cold or slightly warm. If the cookware is
hot then it should be considered as unsuitable
for microwave use.
Using the accessories
Racks and trays
Racks and trays have to be inserted into the side
guides until they come to a complete stop.
• The mechanical safety locks that prevent the
rack from being removed accidentally must
face downwards and towards the back of
the oven cavity.
Glass racks and glass dish
The glass dish must be placed on the lowered
pan stand.
The tray rack has to be inserted into the glass
dish. In this way fat can be collected separately
from the food which is being cooked.
Boiling rod
When using the microwave to heat or reheat
liquids, the boiling process may be delayed. To
avoid this, place the boiling rod (or a heat-
resistant plastic spoon) supplied into the
container while heating.
The microwave function can be used
without any food inside the oven only
for this test.
Unsuitable cookware
Risk of damage to the appliance
• Stop the test immediately if there is a
cracking sound or if sparks are emitted from
the cookware. If this happens, it means that
the cookware is not suitable for microwave
cooking.
Gently insert racks and trays into the
oven until they come to a stop.
Clean the trays before using them for
the first time to remove any residues left
by the manufacturing process.
Improper use
Danger of explosion/burns
• To avoid the danger of explosion inside the
appliance or the sudden boiling over of
superheated liquids, always place a boiling
rod in the liquid that is being heated.
High temperature
Risk of damage to the accessory
• Use the boiling rod only with Microwave
functions. The rod must not be used with
combination and traditional functions.