Instruction manual

26 - CLEANING AND MAINTENANCE 91477A235/A
nozzle. Direct the spray towards the side
walls, upwards, downwards and towards
the deflector.
• Close the door.
• During the assisted cleaning cycle, wash the
self-cleaning panels (where fitted), which
were previously removed, separately in
warm water and a small amount of
detergent.
Vapor Clean cycle setting
3. After having accessed the special functions
menu, turn the temperature knob to select
the Vapor Clean function.
4. Press the temperature knob to confirm the
function.
5. Wait 3 seconds before starting the function.
6. At the end of the Vapor Clean cycle,
appears on the display and a
buzzer will sound that can be deactivated
by opening the door or pressing/turning
one of the two knobs.
7. Turn the function knob to 0 to exit from the
function.
Programmed Vapor Clean cycle
It is possible to program the Vapor Clean
function start time, like all other cooking
functions.
1. After having selected the Vapor Clean
function, turn the temperature knob (the
indicator light comes on) to set the time
at which you want the Vapor Clean function
to end.
2. Wait 3 seconds before confirming the
settings.
The appliance waits until the set start time to start
the Vapor Clean function.
Vapor Clean End
1. Turn the function knob to 0 to exit from the
function.
We recommend spraying approx. 20
times at the most.
Do not spray the deflector if it has a self-
cleaning coating.
If the internal temperature is greater
than the one required, the function will
be stopped immediately and the
following message appears on the
display:
Let the appliance cool down before
activating the function.
The duration and temperature
parameters cannot be changed by the
user.