Instruction manual

68 - USE 914779671/E
selected function will be indicated on the
display. To use it, simply turn the functions and
temperature knobs and/or press the buttons on
the lower part of the display, depending on the
operations to be performed by the appliance.
Touch keys (on some models only)
On some versions of the control panel, touch
keys may be present instead of knobs.
• With the touch keys and you
can select the desired function and
parameters (such as time or temperature,
depending on the selected menu) within the
display screen.
• Press and hold the touch key for a few
seconds to exit the current function and
return to the clock screen on the display.
• The touch keys and can be used
to increase or decrease the value of the
selected parameter.
• Press and hold the touch key for a few
seconds to reset the selected parameter to
the default value.
• To confirm the desired value, press the
key on the display.
First use
On the first use, or after a long power failure,
and the button flash on the
appliance display. To be able to start any
cooking function, the current time must be set.
Time setting
1. Press the button.
2. Turn the temperature knob to select the time
format to display ( or ).
3. Press the button to confirm the
modification and go on to adjust the time.
4. Turn the temperature knob to set the current
time.
5. Press the button to set the current time
and go to the selection of minutes.
6. Turn the temperature knob to select the
minutes of the current time.
7. Press the button to confirm.
Press the or keys
continuously to scroll quickly through the
parameters you want to change.
Press the or keys
continuously to modify quickly the value
of the selected parameter.
By convention, all instructions in this
manual will be explained with reference
to the model equipped with knobs.
If the time is not set, the oven will not
switch on.
When the version is selected,
the display shows (morning) or
(afternoon).
It may become necessary to change the
current time, for example for daylight
saving time.
When the current time is visible, after 2
minutes from the last knob operation it is
displayed with low brightness.
To cancel the operation, turn the
function knob or hold down the button
for a few seconds.