Instruction manual

CLEANING AND MAINTENANCE - 95914779671/E
e
2. Open the door and pull the filling drawer
out of its housing.
3. Insert the funnel provided in the filling
drawer.
4. Pour the descaling solution until the max.
level indicator light comes on (the
reservoir contains about 800 ml of water).
5. At the end, remove the funnel and place the
filling drawer back in its place.
Boiler descaling function
1. Close the door
2. Press the button to start the function.
3. Descaling starts. The heating elements are
activated for the first 10 minutes of the
process.
4. After 10 minutes, the heating elements
switch off while the descaling process
continues for the next 50 minutes.
At the end of the descaling process, the
appliance sounds an acoustic signal and the
display shows the following . The
indicator light comes on to indicate the
request to drain the descaling solution.
Reservoir draining
1. Open the door
If there is too much water in the
reservoir, the excess water will drain
into the oven cavity. In this case dry with
a cloth or sponge before proceeding.
Each time the door is opened, the
function in progress stops and then
automatically restarts when the door is
closed again.