Instruction manual

CLEANING AND MAINTENANCE - 4991477A296/A
e
14. Pour one litre of water into the funnel placed
in the loading drawer (using a bottle or a
graduated jug) until it has overflown to the
bottom of the cavity.
15.When you have finished filling water into the
reservoir, touch the CONFIRM button
to continue with the function.
The appliance starts the function using the
parameters set.
16.At the end of the cleaning process, the
display indicates the request to drain water.
17.Drain the remaining water into the deep pan
above the third rack from below.
18.Clean and dry any residual water inside the
oven cavity.
Manual descaling
When you wish to perform descaling in
advance, you can run the function manually:
1. Touch the OTHER FUNCTIONS
button on the "main menu" (in the main area
).
2. Touch the sub-menu button (located in
the lower area ).
3. Touch the DESCALING button .
4. Proceed with descaling as described in the
previous paragraphs.
Manual cleaning of reservoir and
hydraulic circuit
1. Touch the OTHER FUNCTIONS
button on the "main menu" (in the main area
).
2. Touch the sub-menu button (in the
lower area ).
3. Touch the CLEAN RESERVOIR
button.
Preliminary operations
4. Open the door and pull the loading drawer
out of its housing.
fig. 1
5. Insert the funnel provided in the loading
drawer.
fig. 2
6. Pour the water (using a bottle or a
measuring jug) until the reservoir max. level
indicator light comes on (in the
information area on the right) to show
that the max. level has been reached
Function that performs descaling of
boiler.
This function allows the reservoir and
the hydraulic circuit of the appliance to
be cleaned.