Instruction manual

16 - USE 91477A548/A
1. After selecting a cooking function and
temperature, press the button on the
display.
The indicator light flashes.
2. Press the and touch buttons on
the control panel to set the cooking duration
(from 1 minute to 13 hours) (for example
"25 minutes").
3. Press the button.
The indicator light flashes on the display.
4. Press the and touch buttons to
set the end-of-cooking time (e.g. "13:15").
5. Press the button to confirm end-of-
cooking time.
6. Press the button to start the function.
The appliance waits for the set start time.
At the end of the cooking process an acoustic
signal sounds and the display shows .
7. Press the touch button on the control
panel to exit the function.
To delete a programmed cooking
1. Press the button for a few seconds.
The indicator light flashes on the
display.
2. Press the button shortly. The indicator
light flashes on the display.
3. Press the touch button on the control
panel to reset the cooking time.
4. Press the button to confirm.
Minute minder timing during a cooking
process
1. Press the button. The indicator light
flashes on the display.
1. Press the button. The display shows
and the indicator light
flashing.
2. Press the and touch buttons on
the control panel to set the duration of the
minute minder (from 1 minute to 13 hours).
3. Press the button to confirm.
4. At the end of the minute minder timer, an
acoustic signal sounds and the indicator
light flashes on the display.
5. Press the button to quit the function.
List of traditional cooking functions
For safety reasons, it is not possible to
set the end of cooking time by itself
without setting the cooking duration.
The minutes required for preheating are
already included in the end-of-cooking
time.
In this way, only the programmed
cooking is cancelled. Timed cooking
starts immediately with the preheating
phase.
The minute minder timer does not stop
the cooking operation but rather informs
the user when the set time has run out.
Not all functions are available on some
models.