INSTALLATION INSTRUCTIONS INSTRUCTIONS POUR L’INSTALLATION INSTRUCCIONES DE MONTAJE BUILT-IN OVEN FOUR ENCASTRABLE HORNO EMPOTRADO
1-6 ENGLISH THANK YOU FOR YOUR TRUST AND FOR BUYING THIS APPLIANCE. PLEASE READ THIS MANUAL CAREFULLY. IT CONTAINS ALL NECESSARY INSTRUCTIONS TO CONVERT THE GAS SUPPLY OF THIS PRODUCT. 7 - 12 FRANÇAIS NOUS VOUS REMERCIONS DE VOTRE CONFIANCE ET DE L’ACHAT DE CET APPAREIL. S’IL VOUS PLAÎT, LISEZ CE MANUEL ATTENTIVEMENT. IL CONTIENT TOUTES LES INSTRUCTIONS NECESSAIRES POUR CONVERTIR L'ALIMENTATION EN GAZ DE CE PRODUIT.
OVEN INSTALLATION MANUAL ENGLISH TABLE OF CONTENTS page I ntroduc tion 1 Installation notes 2 Tools you will need 1 Wall or under counter installation, single oven 3 Electrical connections 6 Power requirements 1 Wall installation double oven 3 3-wire branch circuit 6 page page Connecting to 120/208V circuit 5 Choosing oven location 1 F lus h ins ta lla tion 4 4 -wire bra nc h c irc uit 6 Steps for installation 1 Electrical supply 5 Final check list 6 Technical data 2 Wiri
OVEN INSTALLATION MANUAL ENGLISH TECHNICAL DATA Electrical Ratings and Maximum Connected Load For cutout dimensions see following section titled: Preparing location @ 120/240 Volts 60Hz SINGLE OVEN Amperes SOU330X 16,9 DOUBLE OVEN UPPER CAVITY 3,84 Amperes kW @ 120/208 Volts 60Hz Amperes kW 17,5 3,54 Amperes kW LOWER CAVITY 33,8 DOU330X kW 7,68 32,4 6,48 INSTALLATION NOTES 1. Do not slide oven across floor. Damage to floor covering or floor could result.
OVEN INSTALLATION MANUAL ENGLISH WALL OR UNDER COUNTER INSTALLATION, SINGLE OVEN Electrical supply junction box Electrical supply junction box Secure oven to cabinet using the screws provided. Screws should be inserted through the mounting holes in the positions indicated in the frame (open door to see frame and mounting holes). Do not over tighten screws. WALL INSTALLATION, DOUBLE OVEN Electrical supply junction box Secure oven to cabinet using the screws provided.
OVEN INSTALLATION MANUAL ENGLISH FLUSH INSTALLATION Ltr.
OVEN INSTALLATION MANUAL ENGLISH ELECTRICAL SUPPLY CONNECTING TO 208 VOLT CIRCUIT Before installing the oven have a qualified electrician verify that your home is provided with adequate electrical service and that the addition of the oven will not overload the branch circuit on which it is to be installed. A separate three-wire or four-wire single phase, 240 Volt, 60 Hz, or a 208 Volt, 60Hz branch circuit is required. NOTE : FOR USE WITH 208 V, 60 HZ SUPPLY VOLTAGE, SEE CONNECTING TO 208 VOLT CIRCUIT.
OVEN INSTALLATION MANUAL ENGLISH ELECTRICAL CONNECTIONS 3-WIRE BRANCH CIRCUIT (for US only) Be sure your appliance is properly installed and grounded by a qualified technician. Ask your dealer to recommend a qualified technician or an authorized repair service. This appliance is manufactured with a green GROUND wire connected to the oven chassis. After making sure that the power has been turned off, connect the flexible conduit from the oven to the junction box using a U.L. listed conduit connector.
09SG5180 - 1 -10
