User manual

Installation
23
EN
One change injectors warning label
• One sealing gasket
12.5x18.5x2 (mm).
Replacing cooktop
burner nozzles
1. Remove all the grates and all the burner
caps (1) and heads (2);
2. Unscrew the burner nozzles using a 7
mm socket wrench;
3. Replace the nozzles.
4. Put the burners back in their correct
position. Make sure that the holes of the
flame-spreader crowns are aligned with
the thermocouples (3) and igniters (4).
Rapid burner
Unscrew the burner nozzles with a 7 mm
socket wrench and replace them according
to the type of gas to be used and the
description in section ”Burner and nozzle
characteristics tables”.
Dual Flame burner
1. Remove the tightening screws (5), the
cover plate (6) and the gasket (7).
2. Remove the internal (8) and external (9)
nozzles and replace them according to
the type of gas to be used and the
description in section ”Burner and nozzle
characteristics tables”.