User manual

Use
27
EN
12h or 24h format
The default mode is 12h format.
1. Keep the value increase key for a
few seconds. The symbols or
disappear on the display and
24h format is set.
2. Keep the value increase key
pressed for a few seconds to go back to
the 12h format.
Selecting the buzzer
The buzzer can have 3 tones.
1. Hold down the value increase and
value decrease keys at the same
time.
2. Press the clock key . The digit
appears on the
display.
3. Press the value decrease key to
select a different buzzer tone
( or ).
Using the gas oven
Electronic spark ignition:
• Push in zero position up to the
mechanical stop for at least 2 seconds
(the sparking will be heard) and rotate
the temperature knob to between 250°F
and 500°F (120°C and 260°C). This
automatically activates the electric spark
igniter.
NOTE: If the burner does not ignite
after 15 seconds, stop attempting
to light it, leave the oven door
open and do not try to light it
again for at least 60 seconds.
NOTE: If the burner is turned off
unintentionally, turn the knob to the
off position and do not try to light
the burner again for at least 60
seconds.