User manual

Installation
25
EN
6. After having replaced the nozzle, put the
burner back in its seat.
7. Tighten the burner fastening screws.
8. Put the shelf back in its seat.
Replacing the gas grill nozzle
1. Open the door and remove all the
accessories from inside the oven.
2. Loosen the screws fastening the gas
burner with grill to the upper part of the
oven.
3. Push the burner until the nozzle is
accessible.
4. Replace the nozzle with the most suitable
one for the type of gas used using a 7 mm
socket wrench.
5. After having replaced the nozzle, put the
burner back in its seat.
6. Tighten the burner fastening screws.
Take care not to damage the
thermocouple or the igniter when
doing this.
The tightening torque of the nozzle
must be 4 Nm.
Take care not to damage the
thermocouple or the igniter when
doing this.